X-Git-Url: http://git.kpe.io/?a=blobdiff_plain;f=libctsupport%2Finterpolator.cpp;fp=libctsupport%2Finterpolator.cpp;h=e8abdfa0bfc259517b4978ec72818cb23f166b4d;hb=befd71a7157339b52a0c40359518d5276b25d127;hp=0000000000000000000000000000000000000000;hpb=d3fa225aa232e132cc198672c4fc148f96a1ab8c;p=ctsim.git

diff --git a/libctsupport/interpolator.cpp b/libctsupport/interpolator.cpp
new file mode 100644
index 0000000..e8abdfa
--- /dev/null
+++ b/libctsupport/interpolator.cpp
@@ -0,0 +1,132 @@
+/*****************************************************************************
+**  This is part of the CTSim program
+**  Copyright (c) 1983-2001 Kevin Rosenberg
+**
+**  $Id: interpolator.cpp,v 1.1 2001/02/11 21:57:08 kevin Exp $
+**
+**  This program is free software; you can redistribute it and/or modify
+**  it under the terms of the GNU General Public License (version 2) as
+**  published by the Free Software Foundation.
+**
+**  This program is distributed in the hope that it will be useful,
+**  but WITHOUT ANY WARRANTY; without even the implied warranty of
+**  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+**  GNU General Public License for more details.
+**
+**  You should have received a copy of the GNU General Public License
+**  along with this program; if not, write to the Free Software
+**  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+******************************************************************************/
+
+
+#include "ctsupport.h"
+#include "interpolator.h"
+
+
+CubicPolyInterpolator::CubicPolyInterpolator (const double* const y, const int n)
+  : m_pdY(y), m_n(n)
+{
+  if (m_n < 2)
+    sys_error (ERR_SEVERE, "Too few points (%d) in CubicPolyInterpolator", m_n);
+}
+
+CubicPolyInterpolator::~CubicPolyInterpolator ()
+{
+}
+
+
+double
+CubicPolyInterpolator::interpolate (double x)
+{
+  int lo = static_cast<int>(floor(x)) - 1;
+  int hi = lo + 3;
+
+  if (lo < -1) {
+    sys_error (ERR_WARNING, "x=%f, out of range [CubicPolyInterpolator]", x);
+    return (0);
+  } else if (lo == -1)  // linear interpolate at between x = 0 & 1
+    return m_pdY[0] + x * (m_pdY[1] - m_pdY[0]);
+
+  if (hi > m_n) {
+    sys_error (ERR_WARNING, "x=%f, out of range [CubicPolyInterpolator]", x);
+    return (0);
+  } else if (hi == m_n) {// linear interpolate between x = (n-2) and (n-1)
+    double frac = x - (lo + 1);
+    return m_pdY[m_n - 2] + frac * (m_pdY[m_n - 1] - m_pdY[m_n - 2]);
+  }
+
+  // Lagrange formula for N=4 (cubic)
+  
+  double xd_0 = x - lo;
+  double xd_1 = x - (lo + 1);
+  double xd_2 = x - (lo + 2);
+  double xd_3 = x - (lo + 3);
+
+  static double oneSixth = (1. / 6.);
+
+  double y = xd_1 * xd_2 * xd_3 * -oneSixth * m_pdY[lo];
+  y += xd_0 * xd_2 * xd_3 * 0.5 * m_pdY[lo+1];
+  y += xd_0 * xd_1 * xd_3 * -0.5 * m_pdY[lo+2];
+  y += xd_0 * xd_1 * xd_2 * oneSixth * m_pdY[lo+3];
+
+  return (y);
+}
+
+
+
+CubicSplineInterpolator::CubicSplineInterpolator (const double* const y, const int n)
+  : m_pdY(y), m_n(n)
+{
+  // Precalculate 2nd derivative of y and put in m_pdY2
+  // Calculated by solving set of simultaneous CubicSpline spline equations
+  // Only n-2 CubicSpline spline equations, but able to make two more
+  // equations by setting second derivative to 0 at ends 
+
+  m_pdY2 = new double [n];
+  m_pdY2[0] = 0;   // second deriviative = 0 at beginning and end
+  m_pdY2[n-1] = 0;
+
+  double* temp = new double [n - 1];
+  temp[0] = 0;
+  int i;
+  for (i = 1; i < n - 1; i++) { 
+    double t = 2 + (0.5 * m_pdY2[i-1]);
+    temp[i] = y[i+1] + y[i-1] - y[i] - y[i];
+    temp[i] = (3 * temp[i] - 0.5 * temp[i-1]) / t;
+    m_pdY2[i] = -0.5 / t;
+  }
+
+  for (i = n - 2; i >= 0; i--) 
+    m_pdY2[i] = temp[i] + m_pdY2[i] * m_pdY2[i + 1];
+
+  delete temp;
+}
+
+CubicSplineInterpolator::~CubicSplineInterpolator ()
+{
+  delete m_pdY2;
+}
+
+
+double
+CubicSplineInterpolator::interpolate (double x)
+{
+  const static double oneSixth = (1. / 6.);
+  int lo = static_cast<int>(floor(x));
+  int hi = lo + 1;
+
+  if (lo < 0 || hi >= m_n) {
+    sys_error (ERR_SEVERE, "X range out of bounds [CubicSplineInterpolator::interpolate]");
+    return (0);
+  }
+
+  double loFr = hi - x;
+  double hiFr = 1 - loFr;
+  double y = loFr * m_pdY[lo] + hiFr * m_pdY[hi];
+  y += oneSixth * ((loFr*loFr*loFr - loFr) * m_pdY2[lo] + (hiFr*hiFr*hiFr - hiFr) * m_pdY2[hi]);
+  
+  return y;
+}
+
+
+