X-Git-Url: http://git.kpe.io/?p=avr_serial_lcd.git;a=blobdiff_plain;f=serial_lcd.c;h=899e945bcbef5eb56803e48875bcf9d5eb76aaa1;hp=75983d2d2b033b1952daba674a4b5576cf026a72;hb=d84f5cbda7d77ffecbae2aa728b50cd0b02121b3;hpb=4e88dde09a30fd2105f3fc732cbe4f2edbc72244

diff --git a/serial_lcd.c b/serial_lcd.c
index 75983d2..899e945 100644
--- a/serial_lcd.c
+++ b/serial_lcd.c
@@ -105,12 +105,12 @@ REGISTER_VAR(unsigned char ledPwmCycling, "r7", 12);
 #define ledPwmPattern GPIOR0
 #if defined(REGISTER_BIT)
 #define BIT_led_on REGISTER_BIT(GPIOR1,0)
-#define BACKLIGHT_STATUS() BIT_led_on
+#define IS_BACKLIGHT_ON() BIT_led_on
 #define BACKLIGHT_OFF() BIT_led_on = 0
 #define BACKLIGHT_ON() BIT_led_on = 1
 #else
-#define BACKLIGHT_STATUS() (GPIOR1 & 0x01)
-#define BACKLIGHT_OFF() GPIOR1 &=~ ~0x01
+#define IS_BACKLIGHT_ON() (GPIOR1 & 0x01)
+#define BACKLIGHT_OFF() GPIOR1 &= ~0x01
 #define BACKLIGHT_ON() GPIOR1 |= 0x01
 #endif
 
@@ -159,7 +159,7 @@ static inline void LedPwmSetBrightness (unsigned char brightness) {
   unsigned char ledPwmPos;
 
   if (brightness == 0) { // turn backlight off for 0 brightness
-    if (BACKLIGHT_STATUS()) {
+    if (IS_BACKLIGHT_ON()) {
       LedTimerStop();
       ledPwmPattern = 0;
       ledPwmCycling = 0;
@@ -178,12 +178,12 @@ static inline void LedPwmSetBrightness (unsigned char brightness) {
   ledPwmCycling = ledPwmPattern;
   if (ledPwmPos >= LED_BRIGHTNESS_LEVELS-1) { // maximum brightness
     // don't need PWM for continuously on
-    if (BACKLIGHT_STATUS()) {
+    if (IS_BACKLIGHT_ON()) {
       LedTimerStop();
       LED_PORT |= (1<<LED_PIN);
     }
   } else {
-    if (BACKLIGHT_STATUS()) {
+    if (IS_BACKLIGHT_ON()) {
       LedTimerStart();
     }
   }
@@ -304,8 +304,14 @@ MAIN_FUNC() {
   MCUSR = 0; // clear all reset flags
 
   wdt_reset();
+#if defined(__CODEVISIONAVR__)
+#pragma optsize-
+#endif
   WDTCSR |= (1<<WDCE)|(1<<WDE); // start timed sequence (keep old prescaler)
   WDTCSR = (1<<WDE)|(1<<WDP3)|(1<<WDP0); // 1024K cycles, 8.0sec
+#if defined(__CODEVISIONAVR__) && defined(_OPTIMIZE_SIZE_)
+#pragma optsize+
+#endif
   MCUCR &= ~((1<<SM1)|(1<<SM0)); // use idle sleep mode
 
   LedPwmInit ();
@@ -340,8 +346,16 @@ MAIN_FUNC() {
       cli();
       wdt_reset();
       MCUSR &= ~(1<<WDRF); // clear any watchdog interrupt flags
+
+#if defined(__CODEVISIONAVR__)
+#pragma optsize-
+#endif
       WDTCSR |= (1<<WDCE)|(1<<WDE); // start timed sequence (keep old prescaler)
       WDTCSR &= ~(1<<WDE); // watchdog timer off
+#if defined(__CODEVISIONAVR__) && defined(_OPTIMIZE_SIZE_)
+#pragma optsize+
+#endif
+
       sei();
 
       sleep_enable();
@@ -350,8 +364,16 @@ MAIN_FUNC() {
 
       cli();
       wdt_reset();
+
+#if defined(__CODEVISIONAVR__)
+#pragma optsize-
+#endif
       WDTCSR |= (1<<WDCE)|(1<<WDE); // start timed sequence (keep old prescaler)
       WDTCSR &= ~(1<<WDCE);
+#if defined(__CODEVISIONAVR__) && defined(_OPTIMIZE_SIZE_)
+#pragma optsize+
+#endif
+
       sei();
     }
   }
@@ -361,11 +383,11 @@ MAIN_FUNC() {
 void LcdWriteCmd (unsigned char Cmd) {
   LcdBusyWait();
   LCD_DATA_PORT = Cmd;  // BusyWait leaves RS low in "Register mode"
-   NOP();
+  NOP();
   LCD_CONTROL_PORT |= (1<<LCD_E);
   ENABLE_WAIT();
   LCD_CONTROL_PORT &= ~(1<<LCD_E);
-   NOP();
+  NOP();
   LCD_CONTROL_PORT |= (1<<LCD_RS); // Set display to "Character mode"
 }
 
@@ -373,7 +395,7 @@ void LcdWriteData (unsigned char c) {
   LcdBusyWait();
   LCD_CONTROL_PORT |= (1<<LCD_RS); // Set display to "Character Mode"
   LCD_DATA_PORT = c;
-   NOP();
+  NOP();
   LCD_CONTROL_PORT |= (1<<LCD_E);
   ENABLE_WAIT();
   LCD_CONTROL_PORT &= ~(1<<LCD_E);
@@ -384,9 +406,9 @@ unsigned char LcdBusyWait (void) {
   LCD_DATA_DIR = 0x00; // Set LCD data port to inputs
   LCD_CONTROL_PORT &= ~(1<<LCD_RS); // Set display to "Register mode"
   LCD_CONTROL_PORT |= (1<<LCD_RW); // Put the display in the read mode
-   NOP();
+  NOP();
   do {
-      wdt_reset();
+    wdt_reset();
     LCD_CONTROL_PORT |= (1<<LCD_E);
     ENABLE_WAIT();
     LCDStatus = LCD_DATA_PIN_REG;
@@ -404,9 +426,23 @@ void usart_rx_handler(void)
 ISR(USART_RX_vect)
 #endif
 {
-  unsigned char rx = UDR;
+  unsigned char rx, tmphead;
+
+  if (UCSRA & (1<<FE)) {
+    // framing error. Currrently, this is silently ignored
+    // real applications may wish to output information to LCD to indicate
+    // erroroneous byte received
+    return;
+  }
+#if HANDLE_DATA_OVER_RUN_ERROR
+  if (UCSRA & (1<<DOR)) {
+    // some applications may benefit from addind error notification for serial port data overruns
+  }
+#endif
+  
+  rx = UDR;
   // Calculate next buffer position.
-  unsigned char tmphead = sUartRxHead;
+  tmphead = sUartRxHead;
   if (tmphead == UART_RX_BUFFER_SIZE-1)
     tmphead = 0;
   else
@@ -443,7 +479,7 @@ static unsigned char WaitRxChar (void) {
 #if USE_CTS
   // turn off interrupts so that if UART char ready to be stored, then storage
   // will occur after CTS pin is set active. This allows UART ISR to set
-  //  CTS inactive if byte fills buffer after we remove current byte
+  // CTS inactive if byte fills buffer after we remove current byte
   cli();
 #endif