;;;; This file implements The MD5 Message-Digest Algorithm, as defined in ;;;; RFC 1321 by R. Rivest, published April 1992. ;;;; ;;;; It was written by Pierre R. Mai, with copious input from the ;;;; cmucl-help mailing-list hosted at cons.org, in November 2001 and ;;;; has been placed into the public domain. ;;;; ;;;; $Id$ ;;;; ;;;; While the implementation should work on all conforming Common ;;;; Lisp implementations, it has only been optimized for CMU CL, ;;;; where it achieved comparable performance to the standard md5sum ;;;; utility (within a factor of 1.5 or less on iA32 and UltraSparc ;;;; hardware). ;;;; ;;;; Since the implementation makes heavy use of arithmetic on ;;;; (unsigned-byte 32) numbers, acceptable performance is likely only ;;;; on CL implementations that support unboxed arithmetic on such ;;;; numbers in some form. For other CL implementations a 16bit ;;;; implementation of MD5 is probably more suitable. ;;;; ;;;; The code implements correct operation for files of unbounded size ;;;; as is, at the cost of having to do a single generic integer ;;;; addition for each call to update-md5-state. If you call ;;;; update-md5-state frequently with little data, this can pose a ;;;; performance problem. If you can live with a size restriction of ;;;; 512 MB, then you can enable fast fixnum arithmetic by putting ;;;; :md5-small-length onto *features* prior to compiling this file. ;;;; ;;;; Testing code can be compiled by including :md5-testing on ;;;; *features* prior to compilation. In that case evaluating ;;;; (md5::test-rfc1321) will run all the test-cases present in ;;;; Appendix A.5 of RFC 1321 and report on the results. ;;;; Evaluating (md5::test-other) will run further test-cases ;;;; gathered by the author to cover regressions, etc. ;;;; ;;;; This software is "as is", and has no warranty of any kind. The ;;;; authors assume no responsibility for the consequences of any use ;;;; of this software. (defpackage #:md5 (:use #:cl) (:export ;; Low-Level types and functions #:md5-regs #:initial-md5-regs #:md5regs-digest #:update-md5-block #:fill-block #:fill-block-ub8 #:fill-block-char ;; Mid-Level types and functions #:md5-state #:md5-state-p #:make-md5-state #:update-md5-state #:finalize-md5-state ;; High-Level functions on sequences, streams and files #:md5sum-sequence #:md5sum-stream #:md5sum-file)) (in-package #:md5) #+cmu (eval-when (:compile-toplevel) (defparameter *old-expansion-limit* ext:*inline-expansion-limit*) (setq ext:*inline-expansion-limit* (max ext:*inline-expansion-limit* 1000))) #+cmu (eval-when (:compile-toplevel :execute) (defparameter *old-features* *features*) (pushnew (c:backend-byte-order c:*target-backend*) *features*)) ;;; Section 2: Basic Datatypes (eval-when (:compile-toplevel :load-toplevel :execute) (deftype ub32 () "Corresponds to the 32bit quantity word of the MD5 Spec" `(unsigned-byte 32))) (defmacro assemble-ub32 (a b c d) "Assemble an ub32 value from the given (unsigned-byte 8) values, where a is the intended low-order byte and d the high-order byte." `(the ub32 (logior (ash ,d 24) (ash ,c 16) (ash ,b 8) ,a))) ;;; Section 3.4: Auxilliary functions (declaim (inline f g h i) (ftype (function (ub32 ub32 ub32) ub32) f g h i)) (defun f (x y z) (declare (type ub32 x y z) (optimize (speed 3) (safety 0) (space 0) (debug 0))) #+cmu (kernel:32bit-logical-or (kernel:32bit-logical-and x y) (kernel:32bit-logical-andc1 x z)) #-cmu (logior (logand x y) (logandc1 x z))) (defun g (x y z) (declare (type ub32 x y z) (optimize (speed 3) (safety 0) (space 0) (debug 0))) #+cmu (kernel:32bit-logical-or (kernel:32bit-logical-and x z) (kernel:32bit-logical-andc2 y z)) #-cmu (logior (logand x z) (logandc2 y z))) (defun h (x y z) (declare (type ub32 x y z) (optimize (speed 3) (safety 0) (space 0) (debug 0))) #+cmu (kernel:32bit-logical-xor x (kernel:32bit-logical-xor y z)) #-cmu (logxor x y z)) (defun i (x y z) (declare (type ub32 x y z) (optimize (speed 3) (safety 0) (space 0) (debug 0))) #+cmu (kernel:32bit-logical-xor y (kernel:32bit-logical-orc2 x z)) #-cmu (logxor y (logorc2 x z))) (declaim (inline mod32+) (ftype (function (ub32 ub32) ub32) mod32+)) (defun mod32+ (a b) (declare (type ub32 a b) (optimize (speed 3) (safety 0) (space 0) (debug 0))) (ldb (byte 32 0) (+ a b))) #+cmu (define-compiler-macro mod32+ (a b) `(ext:truly-the ub32 (+ ,a ,b))) (declaim (inline rol32) (ftype (function (ub32 (unsigned-byte 5)) ub32) rol32)) (defun rol32 (a s) (declare (type ub32 a) (type (unsigned-byte 5) s) (optimize (speed 3) (safety 0) (space 0) (debug 0))) #+cmu (kernel:32bit-logical-or #+little-endian (kernel:shift-towards-end a s) #+big-endian (kernel:shift-towards-start a s) (ash a (- s 32))) #-cmu (logior (ldb (byte 32 0) (ash a s)) (ash a (- s 32)))) ;;; Section 3.4: Table T (eval-when (:compile-toplevel :load-toplevel :execute) (defparameter *t* (make-array 64 :element-type 'ub32 :initial-contents (loop for i from 1 to 64 collect (truncate (* 4294967296 (abs (sin (float i 0.0d0))))))))) ;;; Section 3.4: Helper Macro for single round definitions (defmacro with-md5-round ((op block) &rest clauses) (loop for (a b c d k s i) in clauses collect `(setq ,a (mod32+ ,b (rol32 (mod32+ (mod32+ ,a (,op ,b ,c ,d)) (mod32+ (aref ,block ,k) ,(aref *t* (1- i)))) ,s))) into result finally (return `(progn ,@result)))) ;;; Section 3.3: (Initial) MD5 Working Set (deftype md5-regs () "The working state of the MD5 algorithm, which contains the 4 32-bit registers A, B, C and D." `(simple-array (unsigned-byte 32) (4))) (defmacro md5-regs-a (regs) `(aref ,regs 0)) (defmacro md5-regs-b (regs) `(aref ,regs 1)) (defmacro md5-regs-c (regs) `(aref ,regs 2)) (defmacro md5-regs-d (regs) `(aref ,regs 3)) (defconstant +md5-magic-a+ (assemble-ub32 #x01 #x23 #x45 #x67) "Initial value of Register A of the MD5 working state.") (defconstant +md5-magic-b+ (assemble-ub32 #x89 #xab #xcd #xef) "Initial value of Register B of the MD5 working state.") (defconstant +md5-magic-c+ (assemble-ub32 #xfe #xdc #xba #x98) "Initial value of Register C of the MD5 working state.") (defconstant +md5-magic-d+ (assemble-ub32 #x76 #x54 #x32 #x10) "Initial value of Register D of the MD5 working state.") (declaim (inline initial-md5-regs)) (defun initial-md5-regs () "Create the initial working state of an MD5 run." (declare (optimize (speed 3) (safety 0) (space 0) (debug 0))) (let ((regs (make-array 4 :element-type '(unsigned-byte 32)))) (declare (type md5-regs regs)) (setf (md5-regs-a regs) +md5-magic-a+ (md5-regs-b regs) +md5-magic-b+ (md5-regs-c regs) +md5-magic-c+ (md5-regs-d regs) +md5-magic-d+) regs)) ;;; Section 3.4: Operation on 16-Word Blocks (defun update-md5-block (regs block) "This is the core part of the MD5 algorithm. It takes a complete 16 word block of input, and updates the working state in A, B, C, and D accordingly." (declare (type md5-regs regs) (type (simple-array ub32 (16)) block) (optimize (speed 3) (safety 0) (space 0) (debug 0))) (let ((A (md5-regs-a regs)) (B (md5-regs-b regs)) (C (md5-regs-c regs)) (D (md5-regs-d regs))) (declare (type ub32 A B C D)) ;; Round 1 (with-md5-round (f block) (A B C D 0 7 1)(D A B C 1 12 2)(C D A B 2 17 3)(B C D A 3 22 4) (A B C D 4 7 5)(D A B C 5 12 6)(C D A B 6 17 7)(B C D A 7 22 8) (A B C D 8 7 9)(D A B C 9 12 10)(C D A B 10 17 11)(B C D A 11 22 12) (A B C D 12 7 13)(D A B C 13 12 14)(C D A B 14 17 15)(B C D A 15 22 16)) ;; Round 2 (with-md5-round (g block) (A B C D 1 5 17)(D A B C 6 9 18)(C D A B 11 14 19)(B C D A 0 20 20) (A B C D 5 5 21)(D A B C 10 9 22)(C D A B 15 14 23)(B C D A 4 20 24) (A B C D 9 5 25)(D A B C 14 9 26)(C D A B 3 14 27)(B C D A 8 20 28) (A B C D 13 5 29)(D A B C 2 9 30)(C D A B 7 14 31)(B C D A 12 20 32)) ;; Round 3 (with-md5-round (h block) (A B C D 5 4 33)(D A B C 8 11 34)(C D A B 11 16 35)(B C D A 14 23 36) (A B C D 1 4 37)(D A B C 4 11 38)(C D A B 7 16 39)(B C D A 10 23 40) (A B C D 13 4 41)(D A B C 0 11 42)(C D A B 3 16 43)(B C D A 6 23 44) (A B C D 9 4 45)(D A B C 12 11 46)(C D A B 15 16 47)(B C D A 2 23 48)) ;; Round 4 (with-md5-round (i block) (A B C D 0 6 49)(D A B C 7 10 50)(C D A B 14 15 51)(B C D A 5 21 52) (A B C D 12 6 53)(D A B C 3 10 54)(C D A B 10 15 55)(B C D A 1 21 56) (A B C D 8 6 57)(D A B C 15 10 58)(C D A B 6 15 59)(B C D A 13 21 60) (A B C D 4 6 61)(D A B C 11 10 62)(C D A B 2 15 63)(B C D A 9 21 64)) ;; Update and return (setf (md5-regs-a regs) (mod32+ (md5-regs-a regs) A) (md5-regs-b regs) (mod32+ (md5-regs-b regs) B) (md5-regs-c regs) (mod32+ (md5-regs-c regs) C) (md5-regs-d regs) (mod32+ (md5-regs-d regs) D)) regs)) ;;; Section 3.4: Converting 8bit-vectors into 16-Word Blocks (declaim (inline fill-block fill-block-ub8 fill-block-char)) (defun fill-block (block buffer offset) "Convert a complete 64 byte input vector segment into the given 16 word MD5 block. This currently works on (unsigned-byte 8) and character simple-arrays, via the functions `fill-block-ub8' and `fill-block-char' respectively." (declare (type (integer 0 #.(- most-positive-fixnum 64)) offset) (type (simple-array ub32 (16)) block) (type (simple-array * (*)) buffer) (optimize (speed 3) (safety 0) (space 0) (debug 0))) (etypecase buffer ((simple-array (unsigned-byte 8) (*)) (fill-block-ub8 block buffer offset)) (simple-string (fill-block-char block buffer offset)))) (defun fill-block-ub8 (block buffer offset) "Convert a complete 64 (unsigned-byte 8) input vector segment starting from offset into the given 16 word MD5 block." (declare (type (integer 0 #.(- most-positive-fixnum 64)) offset) (type (simple-array ub32 (16)) block) (type (simple-array (unsigned-byte 8) (*)) buffer) (optimize (speed 3) (safety 0) (space 0) (debug 0))) #+(and :cmu :little-endian) (kernel:bit-bash-copy buffer (+ (* vm:vector-data-offset vm:word-bits) (* offset vm:byte-bits)) block (* vm:vector-data-offset vm:word-bits) (* 64 vm:byte-bits)) #-(and :cmu :little-endian) (loop for i of-type (integer 0 16) from 0 for j of-type (integer 0 #.most-positive-fixnum) from offset to (+ offset 63) by 4 do (setf (aref block i) (assemble-ub32 (aref buffer j) (aref buffer (+ j 1)) (aref buffer (+ j 2)) (aref buffer (+ j 3)))))) (defun fill-block-char (block buffer offset) "Convert a complete 64 character input string segment starting from offset into the given 16 word MD5 block." (declare (type (integer 0 #.(- most-positive-fixnum 64)) offset) (type (simple-array ub32 (16)) block) (type simple-string buffer) (optimize (speed 3) (safety 0) (space 0) (debug 0))) #+(and :cmu :little-endian) (kernel:bit-bash-copy buffer (+ (* vm:vector-data-offset vm:word-bits) (* offset vm:byte-bits)) block (* vm:vector-data-offset vm:word-bits) (* 64 vm:byte-bits)) #-(and :cmu :little-endian) (loop for i of-type (integer 0 16) from 0 for j of-type (integer 0 #.most-positive-fixnum) from offset to (+ offset 63) by 4 do (setf (aref block i) (assemble-ub32 (char-code (schar buffer j)) (char-code (schar buffer (+ j 1))) (char-code (schar buffer (+ j 2))) (char-code (schar buffer (+ j 3))))))) ;;; Section 3.5: Message Digest Output (declaim (inline md5regs-digest)) (defun md5regs-digest (regs) "Create the final 16 byte message-digest from the MD5 working state in regs. Returns a (simple-array (unsigned-byte 8) (16))." (declare (optimize (speed 3) (safety 0) (space 0) (debug 0)) (type md5-regs regs)) (let ((result (make-array 16 :element-type '(unsigned-byte 8)))) (declare (type (simple-array (unsigned-byte 8) (16)) result)) (macrolet ((frob (reg offset) (let ((var (gensym))) `(let ((,var ,reg)) (declare (type ub32 ,var)) (setf (aref result ,offset) (ldb (byte 8 0) ,var) (aref result ,(+ offset 1)) (ldb (byte 8 8) ,var) (aref result ,(+ offset 2)) (ldb (byte 8 16) ,var) (aref result ,(+ offset 3)) (ldb (byte 8 24) ,var)))))) (frob (md5-regs-a regs) 0) (frob (md5-regs-b regs) 4) (frob (md5-regs-c regs) 8) (frob (md5-regs-d regs) 12)) result)) ;;; Mid-Level Drivers (defstruct (md5-state (:constructor make-md5-state ()) (:copier)) (regs (initial-md5-regs) :type md5-regs :read-only t) (amount 0 :type #-md5-small-length (integer 0 *) #+md5-small-length (unsigned-byte 29)) (block (make-array 16 :element-type '(unsigned-byte 32)) :read-only t :type (simple-array (unsigned-byte 32) (16))) (buffer (make-array 64 :element-type '(unsigned-byte 8)) :read-only t :type (simple-array (unsigned-byte 8) (64))) (buffer-index 0 :type (integer 0 63)) (finalized-p nil)) (declaim (inline copy-to-buffer)) (defun copy-to-buffer (from from-offset count buffer buffer-offset) "Copy a partial segment from input vector from starting at from-offset and copying count elements into the 64 byte buffer starting at buffer-offset." (declare (optimize (speed 3) (safety 0) (space 0) (debug 0)) (type (unsigned-byte 29) from-offset) (type (integer 0 63) count buffer-offset) (type (simple-array * (*)) from) (type (simple-array (unsigned-byte 8) (64)) buffer)) #+cmu (kernel:bit-bash-copy from (+ (* vm:vector-data-offset vm:word-bits) (* from-offset vm:byte-bits)) buffer (+ (* vm:vector-data-offset vm:word-bits) (* buffer-offset vm:byte-bits)) (* count vm:byte-bits)) #-cmu (etypecase from (simple-string (loop for buffer-index of-type (integer 0 64) from buffer-offset for from-index of-type fixnum from from-offset below (+ from-offset count) do (setf (aref buffer buffer-index) (char-code (schar (the simple-string from) from-index))))) ((simple-array (unsigned-byte 8) (*)) (loop for buffer-index of-type (integer 0 64) from buffer-offset for from-index of-type fixnum from from-offset below (+ from-offset count) do (setf (aref buffer buffer-index) (aref (the (simple-array (unsigned-byte 8) (*)) from) from-index)))))) (defun update-md5-state (state sequence &key (start 0) (end (length sequence))) "Update the given md5-state from sequence, which is either a simple-string or a simple-array with element-type (unsigned-byte 8), bounded by start and end, which must be numeric bounding-indices." (declare (type md5-state state) (type (simple-array * (*)) sequence) (type fixnum start end) (optimize (speed 3) #+cmu (safety 0) (space 0) (debug 0)) #+cmu (ext:optimize-interface (safety 1) (debug 1))) (let ((regs (md5-state-regs state)) (block (md5-state-block state)) (buffer (md5-state-buffer state)) (buffer-index (md5-state-buffer-index state)) (length (- end start))) (declare (type md5-regs regs) (type fixnum length) (type (integer 0 63) buffer-index) (type (simple-array (unsigned-byte 32) (16)) block) (type (simple-array (unsigned-byte 8) (64)) buffer)) ;; Handle old rest (unless (zerop buffer-index) (let ((amount (min (- 64 buffer-index) length))) (declare (type (integer 0 63) amount)) (copy-to-buffer sequence start amount buffer buffer-index) (setq start (the fixnum (+ start amount))) (when (>= start end) (setf (md5-state-buffer-index state) (+ buffer-index amount)) (return-from update-md5-state state))) (fill-block-ub8 block buffer 0) (update-md5-block regs block)) ;; Handle main-part and new-rest (etypecase sequence ((simple-array (unsigned-byte 8) (*)) (locally (declare (type (simple-array (unsigned-byte 8) (*)) sequence)) (loop for offset of-type (unsigned-byte 29) from start below end by 64 until (< (- end offset) 64) do (fill-block-ub8 block sequence offset) (update-md5-block regs block) finally (let ((amount (- end offset))) (unless (zerop amount) (copy-to-buffer sequence offset amount buffer 0)) (setf (md5-state-buffer-index state) amount))))) (simple-string (locally (declare (type simple-string sequence)) (loop for offset of-type (unsigned-byte 29) from start below end by 64 until (< (- end offset) 64) do (fill-block-char block sequence offset) (update-md5-block regs block) finally (let ((amount (- end offset))) (unless (zerop amount) (copy-to-buffer sequence offset amount buffer 0)) (setf (md5-state-buffer-index state) amount)))))) (setf (md5-state-amount state) #-md5-small-length (+ (md5-state-amount state) length) #+md5-small-length (the (unsigned-byte 29) (+ (md5-state-amount state) length))) state)) (defun finalize-md5-state (state) "If the given md5-state has not already been finalized, finalize it, by processing any remaining input in its buffer, with suitable padding and appended bit-length, as specified by the MD5 standard. The resulting MD5 message-digest is returned as an array of sixteen (unsigned-byte 8) values. Calling `update-md5-state' after a call to `finalize-md5-state' results in unspecified behaviour." (declare (type md5-state state) (optimize (speed 3) #+cmu (safety 0) (space 0) (debug 0)) #+cmu (ext:optimize-interface (safety 1) (debug 1))) (or (md5-state-finalized-p state) (let ((regs (md5-state-regs state)) (block (md5-state-block state)) (buffer (md5-state-buffer state)) (buffer-index (md5-state-buffer-index state)) (total-length (* 8 (md5-state-amount state)))) (declare (type md5-regs regs) (type (integer 0 63) buffer-index) (type (simple-array ub32 (16)) block) (type (simple-array (unsigned-byte 8) (*)) buffer)) ;; Add mandatory bit 1 padding (setf (aref buffer buffer-index) #x80) ;; Fill with 0 bit padding (loop for index of-type (integer 0 64) from (1+ buffer-index) below 64 do (setf (aref buffer index) #x00)) (fill-block-ub8 block buffer 0) ;; Flush block first if length wouldn't fit (when (>= buffer-index 56) (update-md5-block regs block) ;; Create new fully 0 padded block (loop for index of-type (integer 0 16) from 0 below 16 do (setf (aref block index) #x00000000))) ;; Add 64bit message bit length (setf (aref block 14) (ldb (byte 32 0) total-length)) #-md5-small-length (setf (aref block 15) (ldb (byte 32 32) total-length)) ;; Flush last block (update-md5-block regs block) ;; Done, remember digest for later calls (setf (md5-state-finalized-p state) (md5regs-digest regs))))) ;;; High-Level Drivers (defun md5sum-sequence (sequence &key (start 0) end) "Calculate the MD5 message-digest of data in sequence. On CMU CL this works for all sequences whose element-type is supported by the underlying MD5 routines, on other implementations it only works for 1d simple-arrays with such element types." (declare (optimize (speed 3) (space 0) (debug 0)) (type vector sequence) (type fixnum start)) (let ((state (make-md5-state))) (declare (type md5-state state)) #+cmu (lisp::with-array-data ((data sequence) (real-start start) (real-end end)) (update-md5-state state data :start real-start :end real-end)) #-cmu (let ((real-end (or end (length sequence)))) (declare (type fixnum real-end)) (update-md5-state state sequence :start start :end real-end)) (finalize-md5-state state))) (eval-when (:compile-toplevel :load-toplevel :execute) (defconstant +buffer-size+ (* 128 1024) "Size of internal buffer to use for md5sum-stream and md5sum-file operations. This should be a multiple of 64, the MD5 block size.")) (deftype buffer-index () `(integer 0 ,+buffer-size+)) (defun md5sum-stream (stream) "Calculate an MD5 message-digest of the contents of stream. Its element-type has to be either (unsigned-byte 8) or character." (declare (optimize (speed 3) (space 0) (debug 0))) (let ((state (make-md5-state))) (declare (type md5-state state)) (cond ((equal (stream-element-type stream) '(unsigned-byte 8)) (let ((buffer (make-array +buffer-size+ :element-type '(unsigned-byte 8)))) (declare (type (simple-array (unsigned-byte 8) (#.+buffer-size+)) buffer)) (loop for bytes of-type buffer-index = (read-sequence buffer stream) do (update-md5-state state buffer :end bytes) until (< bytes +buffer-size+) finally (return (finalize-md5-state state))))) ((equal (stream-element-type stream) 'character) (let ((buffer (make-string +buffer-size+))) (declare (type (simple-string #.+buffer-size+) buffer)) (loop for bytes of-type buffer-index = (read-sequence buffer stream) do (update-md5-state state buffer :end bytes) until (< bytes +buffer-size+) finally (return (finalize-md5-state state))))) (t (error "Unsupported stream element-type ~S for stream ~S." (stream-element-type stream) stream))))) (defun md5sum-file (pathname) "Calculate the MD5 message-digest of the file specified by pathname." (declare (optimize (speed 3) (space 0) (debug 0))) (with-open-file (stream pathname :element-type '(unsigned-byte 8)) (md5sum-stream stream))) #+md5-testing (defconstant +rfc1321-testsuite+ '(("" . "d41d8cd98f00b204e9800998ecf8427e") ("a" ."0cc175b9c0f1b6a831c399e269772661") ("abc" . "900150983cd24fb0d6963f7d28e17f72") ("message digest" . "f96b697d7cb7938d525a2f31aaf161d0") ("abcdefghijklmnopqrstuvwxyz" . "c3fcd3d76192e4007dfb496cca67e13b") ("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789" . "d174ab98d277d9f5a5611c2c9f419d9f") ("12345678901234567890123456789012345678901234567890123456789012345678901234567890" . "57edf4a22be3c955ac49da2e2107b67a")) "AList of test input strings and stringified message-digests according to the test suite in Appendix A.5 of RFC 1321") #+md5-testing (defconstant +other-testsuite+ '(;; From padding bug report by Edi Weitz ("1631901HERR BUCHHEISTERCITROEN NORD1043360796beckenbauer" . "d734945e5930bb28859ccd13c830358b") ;; Test padding for strings from 0 to 69*8 bits in size. ("" . "d41d8cd98f00b204e9800998ecf8427e") ("a" . "0cc175b9c0f1b6a831c399e269772661") ("aa" . "4124bc0a9335c27f086f24ba207a4912") ("aaa" . "47bce5c74f589f4867dbd57e9ca9f808") ("aaaa" . "74b87337454200d4d33f80c4663dc5e5") ("aaaaa" . "594f803b380a41396ed63dca39503542") ("aaaaaa" . "0b4e7a0e5fe84ad35fb5f95b9ceeac79") ("aaaaaaa" . "5d793fc5b00a2348c3fb9ab59e5ca98a") ("aaaaaaaa" . "3dbe00a167653a1aaee01d93e77e730e") ("aaaaaaaaa" . "552e6a97297c53e592208cf97fbb3b60") ("aaaaaaaaaa" . "e09c80c42fda55f9d992e59ca6b3307d") ("aaaaaaaaaaa" . "d57f21e6a273781dbf8b7657940f3b03") ("aaaaaaaaaaaa" . "45e4812014d83dde5666ebdf5a8ed1ed") ("aaaaaaaaaaaaa" . "c162de19c4c3731ca3428769d0cd593d") ("aaaaaaaaaaaaaa" . "451599a5f9afa91a0f2097040a796f3d") ("aaaaaaaaaaaaaaa" . "12f9cf6998d52dbe773b06f848bb3608") ("aaaaaaaaaaaaaaaa" . "23ca472302f49b3ea5592b146a312da0") ("aaaaaaaaaaaaaaaaa" . "88e42e96cc71151b6e1938a1699b0a27") ("aaaaaaaaaaaaaaaaaa" . "2c60c24e7087e18e45055a33f9a5be91") ("aaaaaaaaaaaaaaaaaaa" . "639d76897485360b3147e66e0a8a3d6c") ("aaaaaaaaaaaaaaaaaaaa" . "22d42eb002cefa81e9ad604ea57bc01d") ("aaaaaaaaaaaaaaaaaaaaa" . "bd049f221af82804c5a2826809337c9b") ("aaaaaaaaaaaaaaaaaaaaaa" . "ff49cfac3968dbce26ebe7d4823e58bd") ("aaaaaaaaaaaaaaaaaaaaaaa" . "d95dbfee231e34cccb8c04444412ed7d") ("aaaaaaaaaaaaaaaaaaaaaaaa" . "40edae4bad0e5bf6d6c2dc5615a86afb") ("aaaaaaaaaaaaaaaaaaaaaaaaa" . "a5a8bfa3962f49330227955e24a2e67c") ("aaaaaaaaaaaaaaaaaaaaaaaaaa" . "ae791f19bdf77357ff10bb6b0e97e121") ("aaaaaaaaaaaaaaaaaaaaaaaaaaa" . "aaab9c59a88bf0bdfcb170546c5459d6") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "b0f0545856af1a340acdedce23c54b97") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "f7ce3d7d44f3342107d884bfa90c966a") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "59e794d45697b360e18ba972bada0123") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "3b0845db57c200be6052466f87b2198a") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "5eca9bd3eb07c006cd43ae48dfde7fd3") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "b4f13cb081e412f44e99742cb128a1a5") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "4c660346451b8cf91ef50f4634458d41") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "11db24dc3f6c2145701db08625dd6d76") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "80dad3aad8584778352c68ab06250327") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "1227fe415e79db47285cb2689c93963f") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "8e084f489f1bdf08c39f98ff6447ce6d") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "08b2f2b0864bac1ba1585043362cbec9") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "4697843037d962f62a5a429e611e0f5f") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "10c4da18575c092b486f8ab96c01c02f") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "af205d729450b663f48b11d839a1c8df") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "0d3f91798fac6ee279ec2485b25f1124") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "4c3c7c067634daec9716a80ea886d123") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "d1e358e6e3b707282cdd06e919f7e08c") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "8c6ded4f0af86e0a7e301f8a716c4363") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "4c2d8bcb02d982d7cb77f649c0a2dea8") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "bdb662f765cd310f2a547cab1cfecef6") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "08ff5f7301d30200ab89169f6afdb7af") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "6eb6a030bcce166534b95bc2ab45d9cf") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "1bb77918e5695c944be02c16ae29b25e") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "b6fe77c19f0f0f4946c761d62585bfea") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "e9e7e260dce84ffa6e0e7eb5fd9d37fc") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "eced9e0b81ef2bba605cbc5e2e76a1d0") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "ef1772b6dff9a122358552954ad0df65") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "3b0c8ac703f828b04c6c197006d17218") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "652b906d60af96844ebd21b674f35e93") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "dc2f2f2462a0d72358b2f99389458606") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "762fc2665994b217c52c3c2eb7d9f406") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "cc7ed669cf88f201c3297c6a91e1d18d") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "cced11f7bbbffea2f718903216643648") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "24612f0ce2c9d2cf2b022ef1e027a54f") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "b06521f39153d618550606be297466d5") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "014842d480b571495a4a0363793f7367") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "c743a45e0d2e6a95cb859adae0248435") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "def5d97e01e1219fb2fc8da6c4d6ba2f") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "92cb737f8687ccb93022fdb411a77cca") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "a0d1395c7fb36247bfe2d49376d9d133") ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "ab75504250558b788f99d1ebd219abf2")) "AList of test input strings and stringified message-digests according to my additional test suite") #+md5-testing (defun test-with-testsuite (testsuite) (loop for count from 1 for (source . md5-string) in testsuite for md5-digest = (md5sum-sequence source) for md5-result-string = (format nil "~(~{~2,'0X~}~)" (map 'list #'identity md5-digest)) do (format *trace-output* "~2&Test-Case ~D:~% Input: ~S~% Required: ~A~% Returned: ~A~%" count source md5-string md5-result-string) when (string= md5-string md5-result-string) do (format *trace-output* " OK~%") else count 1 into failed and do (format *trace-output* " FAILED~%") finally (format *trace-output* "~2&~[All ~D test cases succeeded~:;~:*~D of ~D test cases failed~].~%" failed (1- count)) (return (zerop failed)))) #+md5-testing (defun test-rfc1321 () (test-with-testsuite +rfc1321-testsuite+)) #+md5-testing (defun test-other () (test-with-testsuite +other-testsuite+)) #+cmu (eval-when (:compile-toplevel :execute) (setq *features* *old-features*)) #+cmu (eval-when (:compile-toplevel) (setq ext:*inline-expansion-limit* *old-expansion-limit*))