--- /dev/null
+
+serial_lcd.elf: file format elf32-avr
+
+Sections:
+Idx Name Size VMA LMA File off Algn
+ 0 .text 000002aa 00000000 00000000 00000074 2**1
+ CONTENTS, ALLOC, LOAD, READONLY, CODE
+ 1 .noinit 00000030 00800060 00800060 0000031e 2**0
+ ALLOC
+ 2 .stab 0000069c 00000000 00000000 00000320 2**2
+ CONTENTS, READONLY, DEBUGGING
+ 3 .stabstr 00000082 00000000 00000000 000009bc 2**0
+ CONTENTS, READONLY, DEBUGGING
+ 4 .debug_aranges 00000050 00000000 00000000 00000a3e 2**0
+ CONTENTS, READONLY, DEBUGGING
+ 5 .debug_pubnames 0000003a 00000000 00000000 00000a8e 2**0
+ CONTENTS, READONLY, DEBUGGING
+ 6 .debug_info 00000765 00000000 00000000 00000ac8 2**0
+ CONTENTS, READONLY, DEBUGGING
+ 7 .debug_abbrev 0000026d 00000000 00000000 0000122d 2**0
+ CONTENTS, READONLY, DEBUGGING
+ 8 .debug_line 0000068a 00000000 00000000 0000149a 2**0
+ CONTENTS, READONLY, DEBUGGING
+ 9 .debug_frame 00000080 00000000 00000000 00001b24 2**2
+ CONTENTS, READONLY, DEBUGGING
+ 10 .debug_str 00000298 00000000 00000000 00001ba4 2**0
+ CONTENTS, READONLY, DEBUGGING
+ 11 .debug_loc 000001cd 00000000 00000000 00001e3c 2**0
+ CONTENTS, READONLY, DEBUGGING
+ 12 .debug_ranges 000000a8 00000000 00000000 00002009 2**0
+ CONTENTS, READONLY, DEBUGGING
+
+Disassembly of section .text:
+
+00000000 <__vectors>:
+ 0: 18 c0 rjmp .+48 ; 0x32 <__ctors_end>
+ 2: 1d c0 rjmp .+58 ; 0x3e <__bad_interrupt>
+ 4: 1c c0 rjmp .+56 ; 0x3e <__bad_interrupt>
+ 6: 1b c0 rjmp .+54 ; 0x3e <__bad_interrupt>
+ 8: 1a c0 rjmp .+52 ; 0x3e <__bad_interrupt>
+ a: 19 c0 rjmp .+50 ; 0x3e <__bad_interrupt>
+ c: 18 c0 rjmp .+48 ; 0x3e <__bad_interrupt>
+ e: 42 c0 rjmp .+132 ; 0x94 <__vector_7>
+ 10: 16 c0 rjmp .+44 ; 0x3e <__bad_interrupt>
+ 12: 15 c0 rjmp .+42 ; 0x3e <__bad_interrupt>
+ 14: 14 c0 rjmp .+40 ; 0x3e <__bad_interrupt>
+ 16: 13 c0 rjmp .+38 ; 0x3e <__bad_interrupt>
+ 18: 12 c0 rjmp .+36 ; 0x3e <__bad_interrupt>
+ 1a: 18 c1 rjmp .+560 ; 0x24c <__vector_13>
+ 1c: 10 c0 rjmp .+32 ; 0x3e <__bad_interrupt>
+ 1e: 0f c0 rjmp .+30 ; 0x3e <__bad_interrupt>
+ 20: 0e c0 rjmp .+28 ; 0x3e <__bad_interrupt>
+ 22: 0d c0 rjmp .+26 ; 0x3e <__bad_interrupt>
+ 24: 0c c0 rjmp .+24 ; 0x3e <__bad_interrupt>
+
+00000026 <BaudLookupTable>:
+ 26: 07 17 2f 5f ../_
+
+0000002a <ledPwmPatterns>:
+ 2a: 10 11 4a 55 5d ee 7f ff ..JU]...
+
+00000032 <__ctors_end>:
+ 32: 11 24 eor r1, r1
+ 34: 1f be out 0x3f, r1 ; 63
+ 36: cf ed ldi r28, 0xDF ; 223
+ 38: cd bf out 0x3d, r28 ; 61
+ 3a: 5c d0 rcall .+184 ; 0xf4 <main>
+ 3c: 34 c1 rjmp .+616 ; 0x2a6 <_exit>
+
+0000003e <__bad_interrupt>:
+ 3e: e0 cf rjmp .-64 ; 0x0 <__vectors>
+
+00000040 <LcdBusyWait>:
+ LCD_CONTROL_PORT &= ~(1<<LCD_E);
+}
+
+unsigned char LcdBusyWait (void) {
+ unsigned char LCDStatus;
+ LCD_DATA_DIR = 0x00; // Set LCD data port to inputs
+ 40: 17 ba out 0x17, r1 ; 23
+ LCD_CONTROL_PORT &= ~(1<<LCD_RS); // Set display to "Register mode"
+ 42: 95 98 cbi 0x12, 5 ; 18
+ LCD_CONTROL_PORT |= (1<<LCD_RW); // Put the display in the read mode
+ 44: 94 9a sbi 0x12, 4 ; 18
+ NOP();
+ 46: 00 00 nop
+ do {
+ wdt_reset();
+ 48: a8 95 wdr
+ LCD_CONTROL_PORT |= (1<<LCD_E);
+ 4a: 96 9a sbi 0x12, 6 ; 18
+ #else
+ #define ENABLE_WAIT() __delay_cycles(4);
+ #endif
+#elif defined(__GNUC__)
+ static __inline__ void _NOP1 (void) { __asm__ volatile ( "nop " "\n\t" ); }
+ static __inline__ void _NOP2 (void) { __asm__ volatile ( "rjmp 1f" "\n\t" "1:" "\n\t" ); }
+ 4c: 00 c0 rjmp .+0 ; 0x4e <LcdBusyWait+0xe>
+ ENABLE_WAIT();
+ LCDStatus = LCD_DATA_PIN_REG;
+ 4e: 00 c0 rjmp .+0 ; 0x50 <LcdBusyWait+0x10>
+ 50: 96 b3 in r25, 0x16 ; 22
+ LCD_CONTROL_PORT &= ~(1<<LCD_E);
+ 52: 96 98 cbi 0x12, 6 ; 18
+ } while (LCDStatus & (1<<LCD_BUSY));
+ 54: 97 fd sbrc r25, 7
+ 56: f8 cf rjmp .-16 ; 0x48 <LcdBusyWait+0x8>
+ LCD_CONTROL_PORT &= ~(1<<LCD_RW); // Put display in write mode
+ 58: 94 98 cbi 0x12, 4 ; 18
+ LCD_DATA_DIR = 0xFF; // Set LCD data port to outputs
+ 5a: 8f ef ldi r24, 0xFF ; 255
+ 5c: 87 bb out 0x17, r24 ; 23
+ return (LCDStatus);
+}
+ 5e: 89 2f mov r24, r25
+ 60: 08 95 ret
+
+00000062 <LcdWriteData>:
+ LCD_CONTROL_PORT &= ~(1<<LCD_E);
+ NOP();
+ LCD_CONTROL_PORT |= (1<<LCD_RS); // Set display to "Character mode"
+}
+
+void LcdWriteData (unsigned char c) {
+ 62: 1f 93 push r17
+ 64: 18 2f mov r17, r24
+ LcdBusyWait();
+ 66: ec df rcall .-40 ; 0x40 <LcdBusyWait>
+ LCD_CONTROL_PORT |= (1<<LCD_RS); // Set display to "Character Mode"
+ 68: 95 9a sbi 0x12, 5 ; 18
+ LCD_DATA_PORT = c;
+ 6a: 18 bb out 0x18, r17 ; 24
+ NOP();
+ 6c: 00 00 nop
+ LCD_CONTROL_PORT |= (1<<LCD_E);
+ 6e: 96 9a sbi 0x12, 6 ; 18
+ 70: 00 c0 rjmp .+0 ; 0x72 <LcdWriteData+0x10>
+ ENABLE_WAIT();
+ LCD_CONTROL_PORT &= ~(1<<LCD_E);
+ 72: 00 c0 rjmp .+0 ; 0x74 <LcdWriteData+0x12>
+ 74: 96 98 cbi 0x12, 6 ; 18
+}
+ 76: 1f 91 pop r17
+ 78: 08 95 ret
+
+0000007a <LcdWriteCmd>:
+ }
+ }
+ MAIN_FUNC_LAST();
+}
+
+void LcdWriteCmd (unsigned char Cmd) {
+ 7a: 1f 93 push r17
+ 7c: 18 2f mov r17, r24
+ LcdBusyWait();
+ 7e: e0 df rcall .-64 ; 0x40 <LcdBusyWait>
+ LCD_DATA_PORT = Cmd; // BusyWait leaves RS low in "Register mode"
+ 80: 18 bb out 0x18, r17 ; 24
+ NOP();
+ 82: 00 00 nop
+ LCD_CONTROL_PORT |= (1<<LCD_E);
+ 84: 96 9a sbi 0x12, 6 ; 18
+ 86: 00 c0 rjmp .+0 ; 0x88 <LcdWriteCmd+0xe>
+ ENABLE_WAIT();
+ LCD_CONTROL_PORT &= ~(1<<LCD_E);
+ 88: 00 c0 rjmp .+0 ; 0x8a <LcdWriteCmd+0x10>
+ 8a: 96 98 cbi 0x12, 6 ; 18
+ NOP();
+ 8c: 00 00 nop
+ LCD_CONTROL_PORT |= (1<<LCD_RS); // Set display to "Character mode"
+ 8e: 95 9a sbi 0x12, 5 ; 18
+}
+ 90: 1f 91 pop r17
+ 92: 08 95 ret
+
+00000094 <__vector_7>:
+#pragma interrupt_handler usart_rx_handler:iv_USART0_RXC
+void usart_rx_handler(void)
+#else
+ISR(USART_RX_vect)
+#endif
+{
+ 94: 1f 92 push r1
+ 96: 0f 92 push r0
+ 98: 0f b6 in r0, 0x3f ; 63
+ 9a: 0f 92 push r0
+ 9c: 11 24 eor r1, r1
+ 9e: 8f 93 push r24
+ a0: ef 93 push r30
+ a2: ff 93 push r31
+ UartStoreRx(UDR);
+ a4: 8c b1 in r24, 0x0c ; 12
+
+INLINE_FUNC_DECLARE(static void UartStoreRx (uint8_t rx));
+static inline void UartStoreRx (uint8_t rx) {
+ unsigned char tmphead;
+
+ if (UCSRA & (1<<FE)) {
+ a6: 5c 99 sbic 0x0b, 4 ; 11
+ a8: 0d c0 rjmp .+26 ; 0xc4 <__vector_7+0x30>
+ // some applications may benefit from addind error notification for serial port data overruns
+ }
+#endif
+
+ // Calculate next buffer position.
+ tmphead = sUartRxHead;
+ aa: e5 2d mov r30, r5
+ if (tmphead == UART_RX_BUFFER_SIZE-1)
+ ac: ef 32 cpi r30, 0x2F ; 47
+ ae: 11 f4 brne .+4 ; 0xb4 <__vector_7+0x20>
+ b0: e0 e0 ldi r30, 0x00 ; 0
+ b2: 01 c0 rjmp .+2 ; 0xb6 <__vector_7+0x22>
+ tmphead = 0;
+ else
+ tmphead++;
+ b4: ef 5f subi r30, 0xFF ; 255
+ // store in buffer if there is room
+ if (tmphead != sUartRxTail) {
+ b6: e6 15 cp r30, r6
+ b8: 29 f0 breq .+10 ; 0xc4 <__vector_7+0x30>
+ sUartRxHead = tmphead; // Store new index.
+ ba: 5e 2e mov r5, r30
+ sUartRxBuf[tmphead] = rx;
+ bc: f0 e0 ldi r31, 0x00 ; 0
+ be: e0 5a subi r30, 0xA0 ; 160
+ c0: ff 4f sbci r31, 0xFF ; 255
+ c2: 80 83 st Z, r24
+#else
+ISR(USART_RX_vect)
+#endif
+{
+ UartStoreRx(UDR);
+}
+ c4: ff 91 pop r31
+ c6: ef 91 pop r30
+ c8: 8f 91 pop r24
+ ca: 0f 90 pop r0
+ cc: 0f be out 0x3f, r0 ; 63
+ ce: 0f 90 pop r0
+ d0: 1f 90 pop r1
+ d2: 18 95 reti
+
+000000d4 <WaitRxChar>:
+
+static unsigned char WaitRxChar (void) {
+ // waits for next RX character, then return it
+ unsigned char tail;
+ do {
+ tail = sUartRxTail; // explicitly set order of volatile variable access
+ d4: 86 2d mov r24, r6
+ wdt_reset();
+ } while (sUartRxHead == tail); // while buffer is empty
+ d6: 95 2d mov r25, r5
+static unsigned char WaitRxChar (void) {
+ // waits for next RX character, then return it
+ unsigned char tail;
+ do {
+ tail = sUartRxTail; // explicitly set order of volatile variable access
+ wdt_reset();
+ d8: a8 95 wdr
+ } while (sUartRxHead == tail); // while buffer is empty
+ da: 98 17 cp r25, r24
+ dc: e9 f3 breq .-6 ; 0xd8 <WaitRxChar+0x4>
+ // CTS inactive if byte fills buffer after we remove current byte
+ cli();
+#endif
+
+ // increment tail position
+ if (tail == UART_RX_BUFFER_SIZE-1)
+ de: 8f 32 cpi r24, 0x2F ; 47
+ e0: 11 f4 brne .+4 ; 0xe6 <__stack+0x7>
+ sUartRxTail = 0;
+ e2: 66 24 eor r6, r6
+ e4: 01 c0 rjmp .+2 ; 0xe8 <__stack+0x9>
+ else
+ sUartRxTail++;
+ e6: 63 94 inc r6
+#if USE_CTS
+ CTS_PORT |= (1<<CTS_PIN); // Ensure CTS is active since just removed a byte
+ sei(); // Allow UART ISR to read character and change potentially change CTS
+#endif
+
+ return sUartRxBuf[sUartRxTail];
+ e8: e6 2d mov r30, r6
+ ea: f0 e0 ldi r31, 0x00 ; 0
+ ec: e0 5a subi r30, 0xA0 ; 160
+ ee: ff 4f sbci r31, 0xFF ; 255
+ f0: 80 81 ld r24, Z
+}
+ f2: 08 95 ret
+
+000000f4 <main>:
+ LcdWriteCmd (LCD_ON); // Power up the display
+ LcdWriteCmd (LCD_CLR); // Power up the display
+}
+
+MAIN_FUNC() {
+ MCUSR = 0; // clear all reset flags
+ f4: 14 be out 0x34, r1 ; 52
+
+ wdt_reset();
+ f6: a8 95 wdr
+#if defined(__CODEVISIONAVR__)
+#pragma optsize-
+#endif
+ WDTCSR |= (1<<WDCE)|(1<<WDE); // start timed sequence (keep old prescaler)
+ f8: 81 b5 in r24, 0x21 ; 33
+ fa: 88 61 ori r24, 0x18 ; 24
+ fc: 81 bd out 0x21, r24 ; 33
+ WDTCSR = (1<<WDE)|(1<<WDP3)|(1<<WDP0); // 1024K cycles, 8.0sec
+ fe: 89 e2 ldi r24, 0x29 ; 41
+ 100: 81 bd out 0x21, r24 ; 33
+#if defined(__CODEVISIONAVR__) && defined(_OPTIMIZE_SIZE_)
+#pragma optsize+
+#endif
+ MCUCR &= ~((1<<SM1)|(1<<SM0)); // use idle sleep mode
+ 102: 85 b7 in r24, 0x35 ; 53
+ 104: 8f 7a andi r24, 0xAF ; 175
+ 106: 85 bf out 0x35, r24 ; 53
+
+INLINE_FUNC_DECLARE(static void LedPwmInit (void));
+static inline void LedPwmInit (void) {
+ // setup PWM to run at 1.25ms per interrupt.
+ // This allows 8 levels of brightness at minimum of 100Hz flicker rate.
+ TCCR0A = (1<<WGM01); // CTC mode
+ 108: 82 e0 ldi r24, 0x02 ; 2
+ 10a: 80 bf out 0x30, r24 ; 48
+ TCCR0B = 0; // timer off
+ 10c: 13 be out 0x33, r1 ; 51
+ OCR0A = 72; // 1.25ms with CLK/256 prescaler @ 14.7456MHz
+ 10e: 88 e4 ldi r24, 0x48 ; 72
+ 110: 86 bf out 0x36, r24 ; 54
+ TIMSK = (1<<OCIE0A); // Turn on timer0 COMPA intr (all other timer intr off)
+ 112: 81 e0 ldi r24, 0x01 ; 1
+ 114: 89 bf out 0x39, r24 ; 57
+ LED_PORT &= ~(1<<LED_PIN); // Ensure LED is off during initialization
+ 116: 91 98 cbi 0x12, 1 ; 18
+ LED_DIR |= (1<<LED_PIN); // Ensure LED is output direction
+ 118: 89 9a sbi 0x11, 1 ; 17
+ BACKLIGHT_OFF(); // note that LED is off
+ 11a: a0 98 cbi 0x14, 0 ; 20
+ ledPwmPattern = 0xFF; // maximum brightness
+ 11c: 9f ef ldi r25, 0xFF ; 255
+ 11e: 93 bb out 0x13, r25 ; 19
+
+
+INLINE_FUNC_DECLARE(static void LcdInit (void));
+static inline void LcdInit (void) {
+ // Set BAUD_J2:BAUD_J1 PULL-UPS active
+ LCD_CONTROL_PORT = (1<<BAUD_J2) | (1<<BAUD_J1);
+ 120: 8c e0 ldi r24, 0x0C ; 12
+ 122: 82 bb out 0x12, r24 ; 18
+ // Set LCD_control BAUD_J2:BAUD_J1 to inputs
+ LCD_CONTROL_DIR = 0xF2;
+ 124: 82 ef ldi r24, 0xF2 ; 242
+ 126: 81 bb out 0x11, r24 ; 17
+ milliseconds can be achieved.
+ */
+void
+_delay_loop_2(uint16_t __count)
+{
+ __asm__ volatile (
+ 128: e0 e0 ldi r30, 0x00 ; 0
+ 12a: f8 ed ldi r31, 0xD8 ; 216
+ 12c: 31 97 sbiw r30, 0x01 ; 1
+ 12e: f1 f7 brne .-4 ; 0x12c <main+0x38>
+
+ _delay_us(15000);
+ LCD_CONTROL_PORT |= (1<<LCD_RS); // Set LCD_RS HIGH
+ 130: 95 9a sbi 0x12, 5 ; 18
+
+ // Initialize the LCD Data AVR I/O
+ LCD_DATA_DIR = 0xFF; // Set LCD_DATA_PORT as all outputs
+ 132: 97 bb out 0x17, r25 ; 23
+ LCD_DATA_PORT = 0x00; // Set LCD_DATA_PORT to logic low
+ 134: 18 ba out 0x18, r1 ; 24
+
+ // Initialize the LCD controller
+ LCD_CONTROL_PORT &= ~(1<<LCD_RS);
+ 136: 95 98 cbi 0x12, 5 ; 18
+ LcdWriteData (DATA_8);
+ 138: 80 e3 ldi r24, 0x30 ; 48
+ 13a: 93 df rcall .-218 ; 0x62 <LcdWriteData>
+ 13c: 8a e0 ldi r24, 0x0A ; 10
+ 13e: 9b e3 ldi r25, 0x3B ; 59
+ 140: 01 97 sbiw r24, 0x01 ; 1
+ 142: f1 f7 brne .-4 ; 0x140 <main+0x4c>
+
+ _delay_us(4100);
+ LcdWriteData (DATA_8);
+ 144: 80 e3 ldi r24, 0x30 ; 48
+ 146: 8d df rcall .-230 ; 0x62 <LcdWriteData>
+ 148: 80 e7 ldi r24, 0x70 ; 112
+ 14a: 91 e0 ldi r25, 0x01 ; 1
+ 14c: 01 97 sbiw r24, 0x01 ; 1
+ 14e: f1 f7 brne .-4 ; 0x14c <main+0x58>
+
+ _delay_us(100);
+ LcdWriteData (DATA_8);
+ 150: 80 e3 ldi r24, 0x30 ; 48
+ 152: 87 df rcall .-242 ; 0x62 <LcdWriteData>
+ LCD_CONTROL_PORT |= (1<<LCD_RS);
+ 154: 95 9a sbi 0x12, 5 ; 18
+
+ // The display will be out into 8 bit data mode here
+ LcdWriteCmd (LCD_8_Bit | LCD_4_Line); // Set 8 bit data, 4 display lines
+ 156: 88 e3 ldi r24, 0x38 ; 56
+ 158: 90 df rcall .-224 ; 0x7a <LcdWriteCmd>
+ LcdWriteCmd (LCD_ON); // Power up the display
+ 15a: 8c e0 ldi r24, 0x0C ; 12
+ 15c: 8e df rcall .-228 ; 0x7a <LcdWriteCmd>
+ LcdWriteCmd (LCD_CLR); // Power up the display
+ 15e: 81 e0 ldi r24, 0x01 ; 1
+ 160: 8c df rcall .-232 ; 0x7a <LcdWriteCmd>
+
+
+INLINE_FUNC_DECLARE(static void UsartInit (void));
+static inline void UsartInit(void) {
+ // Initialize USART
+ UCSRB = 0; // Disable while setting baud rate
+ 162: 1a b8 out 0x0a, r1 ; 10
+ UCSRA = 0;
+ 164: 1b b8 out 0x0b, r1 ; 11
+ UCSRC = (1<<UCSZ1) | (1<<UCSZ0); // 8 bit data
+ 166: 86 e0 ldi r24, 0x06 ; 6
+ 168: 83 b9 out 0x03, r24 ; 3
+= {BAUD_115200, BAUD_38400, BAUD_19200, BAUD_9600};
+
+INLINE_FUNC_DECLARE(static unsigned char GetUsartBaud (void));
+static inline unsigned char GetUsartBaud (void) {
+ // Get BAUD rate jumper settings
+ unsigned char BaudSelectJumpersValue = BAUD_PIN_REG;
+ 16a: e0 b3 in r30, 0x10 ; 16
+ // Mask off unwanted bits
+ BaudSelectJumpersValue &= (1<<BAUD_J2) | (1<<BAUD_J1);
+ 16c: ec 70 andi r30, 0x0C ; 12
+ // This is two bits too far to the left and the array index will
+ // increment by 4, instead of 1.
+ // Shift BAUD_J2 & BAUD_J1 right by two bit positions for proper array indexing
+ BaudSelectJumpersValue = (BaudSelectJumpersValue >> BAUD_J1);
+
+ return PGM_READ_BYTE (&BaudLookupTable[BaudSelectJumpersValue]);
+ 16e: e6 95 lsr r30
+ 170: e6 95 lsr r30
+ 172: f0 e0 ldi r31, 0x00 ; 0
+ 174: ea 5d subi r30, 0xDA ; 218
+ 176: ff 4f sbci r31, 0xFF ; 255
+ 178: e4 91 lpm r30, Z+
+static inline void UsartInit(void) {
+ // Initialize USART
+ UCSRB = 0; // Disable while setting baud rate
+ UCSRA = 0;
+ UCSRC = (1<<UCSZ1) | (1<<UCSZ0); // 8 bit data
+ UBRRL = GetUsartBaud (); // Set baud rate
+ 17a: e9 b9 out 0x09, r30 ; 9
+ UBRRH = 0; // Set baud rate hi
+ 17c: 12 b8 out 0x02, r1 ; 2
+ UCSRB = (1<<RXEN)|(1<<RXCIE); // RXEN = Enable
+ 17e: 80 e9 ldi r24, 0x90 ; 144
+ 180: 8a b9 out 0x0a, r24 ; 10
+ sUartRxHead = 0; // register variable, need to explicitly zero
+ 182: 55 24 eor r5, r5
+ sUartRxTail = 0; // register variable, need to explicitly zero
+ 184: 66 24 eor r6, r6
+ LcdInit ();
+
+ // Initialize the AVR USART
+ UsartInit ();
+
+ sei();
+ 186: 78 94 sei
+ TCCR0B = 0;
+}
+
+INLINE_FUNC_DECLARE(static void LedTimerStart (void));
+static inline void LedTimerStart (void) {
+ TCCR0B = (1<<CS02); // Start with 256 prescaler
+ 188: 14 e0 ldi r17, 0x04 ; 4
+ UsartInit ();
+
+ sei();
+ while (1) {
+ unsigned char tail = sUartRxTail; // explicitly set order of volatile access
+ if (tail != sUartRxHead) { // Check if UART RX buffer has a character
+ 18a: 65 14 cp r6, r5
+ 18c: 09 f4 brne .+2 ; 0x190 <main+0x9c>
+ 18e: 41 c0 rjmp .+130 ; 0x212 <main+0x11e>
+ unsigned char rx_byte = WaitRxChar();
+ 190: a1 df rcall .-190 ; 0xd4 <WaitRxChar>
+
+ // avoid use of switch statement as ImageCraft and GCC produce signifcantly
+ // more code for a switch statement than a sequence of if/else if
+ if (rx_byte == LED_SW_OFF) {
+ 192: 8d 3f cpi r24, 0xFD ; 253
+ 194: 21 f4 brne .+8 ; 0x19e <main+0xaa>
+ }
+}
+
+INLINE_FUNC_DECLARE(static void LedPwmSwitchOff (void));
+static inline void LedPwmSwitchOff (void) {
+ LED_PORT &= ~(1<<LED_PIN);
+ 196: 91 98 cbi 0x12, 1 ; 18
+ BACKLIGHT_OFF();
+ 198: a0 98 cbi 0x14, 0 ; 20
+
+#else
+// Using a platform that has proper inline functions
+INLINE_FUNC_DECLARE(static void LedTimerStop (void));
+static inline void LedTimerStop (void) {
+ TCCR0B = 0;
+ 19a: 13 be out 0x33, r1 ; 51
+ 19c: f6 cf rjmp .-20 ; 0x18a <main+0x96>
+
+ // avoid use of switch statement as ImageCraft and GCC produce signifcantly
+ // more code for a switch statement than a sequence of if/else if
+ if (rx_byte == LED_SW_OFF) {
+ LedPwmSwitchOff();
+ } else if (rx_byte == LED_SW_ON) {
+ 19e: 8c 3f cpi r24, 0xFC ; 252
+ 1a0: 29 f4 brne .+10 ; 0x1ac <main+0xb8>
+ LedTimerStop();
+}
+
+INLINE_FUNC_DECLARE(static void LedPwmSwitchOn (void));
+static inline void LedPwmSwitchOn (void) {
+ BACKLIGHT_ON();
+ 1a2: a0 9a sbi 0x14, 0 ; 20
+ if (ledPwmPattern == 0xFF) { // maximum brightness, no need for PWM
+ 1a4: 83 b3 in r24, 0x13 ; 19
+ 1a6: 8f 3f cpi r24, 0xFF ; 255
+ 1a8: 59 f5 brne .+86 ; 0x200 <main+0x10c>
+ 1aa: 25 c0 rjmp .+74 ; 0x1f6 <main+0x102>
+ // more code for a switch statement than a sequence of if/else if
+ if (rx_byte == LED_SW_OFF) {
+ LedPwmSwitchOff();
+ } else if (rx_byte == LED_SW_ON) {
+ LedPwmSwitchOn();
+ } else if (rx_byte == LED_SET_BRIGHTNESS) {
+ 1ac: 8b 3f cpi r24, 0xFB ; 251
+ 1ae: 51 f5 brne .+84 ; 0x204 <main+0x110>
+ rx_byte = WaitRxChar(); // read next byte which will be brightness
+ 1b0: 91 df rcall .-222 ; 0xd4 <WaitRxChar>
+
+INLINE_FUNC_DECLARE(static void LedPwmSetBrightness (unsigned char brightness));
+static inline void LedPwmSetBrightness (unsigned char brightness) {
+ unsigned char ledPwmPos;
+
+ if (brightness == 0) { // turn backlight off for 0 brightness
+ 1b2: 88 23 and r24, r24
+ 1b4: 39 f4 brne .+14 ; 0x1c4 <main+0xd0>
+ if (IS_BACKLIGHT_ON()) {
+ 1b6: a0 9b sbis 0x14, 0 ; 20
+ 1b8: e8 cf rjmp .-48 ; 0x18a <main+0x96>
+
+#else
+// Using a platform that has proper inline functions
+INLINE_FUNC_DECLARE(static void LedTimerStop (void));
+static inline void LedTimerStop (void) {
+ TCCR0B = 0;
+ 1ba: 13 be out 0x33, r1 ; 51
+ unsigned char ledPwmPos;
+
+ if (brightness == 0) { // turn backlight off for 0 brightness
+ if (IS_BACKLIGHT_ON()) {
+ LedTimerStop();
+ ledPwmPattern = 0;
+ 1bc: 13 ba out 0x13, r1 ; 19
+ ledPwmCycling = 0;
+ 1be: 77 24 eor r7, r7
+ LED_PORT &= ~(1<<LED_PIN);
+ 1c0: 91 98 cbi 0x12, 1 ; 18
+ 1c2: e3 cf rjmp .-58 ; 0x18a <main+0x96>
+ }
+ return;
+ }
+
+ ledPwmPos = (brightness * (LED_BRIGHTNESS_LEVELS-1) + (unsigned int) 127) >> 8;
+ 1c4: 90 e0 ldi r25, 0x00 ; 0
+ 1c6: 67 e0 ldi r22, 0x07 ; 7
+ 1c8: 70 e0 ldi r23, 0x00 ; 0
+ 1ca: 5b d0 rcall .+182 ; 0x282 <__mulhi3>
+ 1cc: 81 58 subi r24, 0x81 ; 129
+ 1ce: 9f 4f sbci r25, 0xFF ; 255
+ 1d0: 89 2f mov r24, r25
+ 1d2: 99 27 eor r25, r25
+ 1d4: 98 2f mov r25, r24
+ 1d6: 88 30 cpi r24, 0x08 ; 8
+ 1d8: 08 f0 brcs .+2 ; 0x1dc <main+0xe8>
+ 1da: 97 e0 ldi r25, 0x07 ; 7
+ // Below is probably not required, but ensures we don't exceed array
+ if (ledPwmPos > LED_BRIGHTNESS_LEVELS - 1)
+ ledPwmPos = LED_BRIGHTNESS_LEVELS - 1;
+
+ ledPwmPattern = PGM_READ_BYTE (&ledPwmPatterns[ledPwmPos]);
+ 1dc: e9 2f mov r30, r25
+ 1de: f0 e0 ldi r31, 0x00 ; 0
+ 1e0: e6 5d subi r30, 0xD6 ; 214
+ 1e2: ff 4f sbci r31, 0xFF ; 255
+ 1e4: e4 91 lpm r30, Z+
+ 1e6: e3 bb out 0x13, r30 ; 19
+ ledPwmCount = 0;
+ 1e8: 44 24 eor r4, r4
+ ledPwmCycling = ledPwmPattern;
+ 1ea: 83 b3 in r24, 0x13 ; 19
+ 1ec: 78 2e mov r7, r24
+ if (ledPwmPos >= LED_BRIGHTNESS_LEVELS-1) { // maximum brightness
+ 1ee: 97 30 cpi r25, 0x07 ; 7
+ 1f0: 29 f4 brne .+10 ; 0x1fc <main+0x108>
+ // don't need PWM for continuously on
+ if (IS_BACKLIGHT_ON()) {
+ 1f2: a0 9b sbis 0x14, 0 ; 20
+ 1f4: ca cf rjmp .-108 ; 0x18a <main+0x96>
+
+#else
+// Using a platform that has proper inline functions
+INLINE_FUNC_DECLARE(static void LedTimerStop (void));
+static inline void LedTimerStop (void) {
+ TCCR0B = 0;
+ 1f6: 13 be out 0x33, r1 ; 51
+ ledPwmCycling = ledPwmPattern;
+ if (ledPwmPos >= LED_BRIGHTNESS_LEVELS-1) { // maximum brightness
+ // don't need PWM for continuously on
+ if (IS_BACKLIGHT_ON()) {
+ LedTimerStop();
+ LED_PORT |= (1<<LED_PIN);
+ 1f8: 91 9a sbi 0x12, 1 ; 18
+ 1fa: c7 cf rjmp .-114 ; 0x18a <main+0x96>
+ }
+ } else {
+ if (IS_BACKLIGHT_ON()) {
+ 1fc: a0 9b sbis 0x14, 0 ; 20
+ 1fe: c5 cf rjmp .-118 ; 0x18a <main+0x96>
+ TCCR0B = 0;
+}
+
+INLINE_FUNC_DECLARE(static void LedTimerStart (void));
+static inline void LedTimerStart (void) {
+ TCCR0B = (1<<CS02); // Start with 256 prescaler
+ 200: 13 bf out 0x33, r17 ; 51
+ 202: c3 cf rjmp .-122 ; 0x18a <main+0x96>
+ } else if (rx_byte == LED_SW_ON) {
+ LedPwmSwitchOn();
+ } else if (rx_byte == LED_SET_BRIGHTNESS) {
+ rx_byte = WaitRxChar(); // read next byte which will be brightness
+ LedPwmSetBrightness(rx_byte);
+ } else if (rx_byte == REG_MODE) {
+ 204: 8e 3f cpi r24, 0xFE ; 254
+ 206: 19 f4 brne .+6 ; 0x20e <main+0x11a>
+ LcdWriteCmd (WaitRxChar()); // Send LCD command character
+ 208: 65 df rcall .-310 ; 0xd4 <WaitRxChar>
+ 20a: 37 df rcall .-402 ; 0x7a <LcdWriteCmd>
+ 20c: be cf rjmp .-132 ; 0x18a <main+0x96>
+ } else {
+ LcdWriteData (rx_byte); // Send LCD data character
+ 20e: 29 df rcall .-430 ; 0x62 <LcdWriteData>
+ 210: bc cf rjmp .-136 ; 0x18a <main+0x96>
+ }
+ } else {
+ // No characters waiting in RX buffer
+
+ cli();
+ 212: f8 94 cli
+ wdt_reset();
+ 214: a8 95 wdr
+ MCUSR &= ~(1<<WDRF); // clear any watchdog interrupt flags
+ 216: 84 b7 in r24, 0x34 ; 52
+ 218: 87 7f andi r24, 0xF7 ; 247
+ 21a: 84 bf out 0x34, r24 ; 52
+
+#if defined(__CODEVISIONAVR__)
+#pragma optsize-
+#endif
+ WDTCSR |= (1<<WDCE)|(1<<WDE); // start timed sequence (keep old prescaler)
+ 21c: 81 b5 in r24, 0x21 ; 33
+ 21e: 88 61 ori r24, 0x18 ; 24
+ 220: 81 bd out 0x21, r24 ; 33
+ WDTCSR &= ~(1<<WDE); // watchdog timer off
+ 222: 81 b5 in r24, 0x21 ; 33
+ 224: 87 7f andi r24, 0xF7 ; 247
+ 226: 81 bd out 0x21, r24 ; 33
+#if defined(__CODEVISIONAVR__) && defined(_OPTIMIZE_SIZE_)
+#pragma optsize+
+#endif
+
+ sei();
+ 228: 78 94 sei
+
+ sleep_enable();
+ 22a: 85 b7 in r24, 0x35 ; 53
+ 22c: 80 62 ori r24, 0x20 ; 32
+ 22e: 85 bf out 0x35, r24 ; 53
+ sleep_cpu();
+ 230: 88 95 sleep
+ sleep_disable();
+ 232: 85 b7 in r24, 0x35 ; 53
+ 234: 8f 7d andi r24, 0xDF ; 223
+ 236: 85 bf out 0x35, r24 ; 53
+
+ cli();
+ 238: f8 94 cli
+ wdt_reset();
+ 23a: a8 95 wdr
+
+#if defined(__CODEVISIONAVR__)
+#pragma optsize-
+#endif
+ WDTCSR |= (1<<WDCE)|(1<<WDE); // start timed sequence (keep old prescaler)
+ 23c: 81 b5 in r24, 0x21 ; 33
+ 23e: 88 61 ori r24, 0x18 ; 24
+ 240: 81 bd out 0x21, r24 ; 33
+ WDTCSR &= ~(1<<WDCE);
+ 242: 81 b5 in r24, 0x21 ; 33
+ 244: 8f 7e andi r24, 0xEF ; 239
+ 246: 81 bd out 0x21, r24 ; 33
+#if defined(__CODEVISIONAVR__) && defined(_OPTIMIZE_SIZE_)
+#pragma optsize+
+#endif
+
+ sei();
+ 248: 78 94 sei
+ 24a: 9f cf rjmp .-194 ; 0x18a <main+0x96>
+
+0000024c <__vector_13>:
+#pragma interrupt_handler timer0_compa_handler:iv_TIMER0_COMPA
+void timer0_compa_handler(void)
+#else
+ ISR(TIMER0_COMPA_vect)
+#endif
+{
+ 24c: 1f 92 push r1
+ 24e: 0f 92 push r0
+ 250: 0f b6 in r0, 0x3f ; 63
+ 252: 0f 92 push r0
+ 254: 11 24 eor r1, r1
+ 256: 8f 93 push r24
+ sei(); // Okay to allow USART interrupts while controlling LED PWM
+ 258: 78 94 sei
+
+ // Set current LED state based on cycling variable
+ if (ledPwmCycling & 0x01) {
+ 25a: 70 fe sbrs r7, 0
+ 25c: 02 c0 rjmp .+4 ; 0x262 <__vector_13+0x16>
+ LED_PORT |= (1<<LED_PIN);
+ 25e: 91 9a sbi 0x12, 1 ; 18
+ 260: 01 c0 rjmp .+2 ; 0x264 <__vector_13+0x18>
+ } else {
+ LED_PORT &= ~(1<<LED_PIN);
+ 262: 91 98 cbi 0x12, 1 ; 18
+ }
+
+ // Update cycling variable for next interrupt
+ if (ledPwmCount >= LED_BRIGHTNESS_LEVELS-1) {
+ 264: 86 e0 ldi r24, 0x06 ; 6
+ 266: 84 15 cp r24, r4
+ 268: 20 f4 brcc .+8 ; 0x272 <__vector_13+0x26>
+ ledPwmCount = 0;
+ 26a: 44 24 eor r4, r4
+ ledPwmCycling = ledPwmPattern;
+ 26c: 83 b3 in r24, 0x13 ; 19
+ 26e: 78 2e mov r7, r24
+ 270: 02 c0 rjmp .+4 ; 0x276 <__vector_13+0x2a>
+ } else {
+ ledPwmCount++;
+ 272: 43 94 inc r4
+ ledPwmCycling >>= 1;
+ 274: 76 94 lsr r7
+ }
+}
+ 276: 8f 91 pop r24
+ 278: 0f 90 pop r0
+ 27a: 0f be out 0x3f, r0 ; 63
+ 27c: 0f 90 pop r0
+ 27e: 1f 90 pop r1
+ 280: 18 95 reti
+
+00000282 <__mulhi3>:
+ 282: 55 27 eor r21, r21
+ 284: 00 24 eor r0, r0
+
+00000286 <__mulhi3_loop>:
+ 286: 80 ff sbrs r24, 0
+ 288: 02 c0 rjmp .+4 ; 0x28e <__mulhi3_skip1>
+ 28a: 06 0e add r0, r22
+ 28c: 57 1f adc r21, r23
+
+0000028e <__mulhi3_skip1>:
+ 28e: 66 0f add r22, r22
+ 290: 77 1f adc r23, r23
+ 292: 61 15 cp r22, r1
+ 294: 71 05 cpc r23, r1
+ 296: 21 f0 breq .+8 ; 0x2a0 <__mulhi3_exit>
+ 298: 96 95 lsr r25
+ 29a: 87 95 ror r24
+ 29c: 00 97 sbiw r24, 0x00 ; 0
+ 29e: 99 f7 brne .-26 ; 0x286 <__mulhi3_loop>
+
+000002a0 <__mulhi3_exit>:
+ 2a0: 95 2f mov r25, r21
+ 2a2: 80 2d mov r24, r0
+ 2a4: 08 95 ret
+
+000002a6 <_exit>:
+ 2a6: f8 94 cli
+
+000002a8 <__stop_program>:
+ 2a8: ff cf rjmp .-2 ; 0x2a8 <__stop_program>