+Aug 22, 2009 Version 5.1.3
+ * src/ctsim.cpp
+ - Improve numbering of unnamed documents. Reduce cut-and-paste code.
+ * configure.ac
+ - Use new AC_INIT form to include package information, email, url
+
Aug 21, 2009 Version 5.1.2
* Conditionalize debugging output
bundled version of getopt_long.
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+
+ This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
Basic Installation
==================
- These are generic installation instructions.
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
- The file `configure.in' is used to create `configure' by a program
-called `autoconf'. You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
+ `./configure' to configure the package for your system.
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
2. Type `make' to compile the package.
all sorts of other programs in order to regenerate files that came
with the distribution.
+ 6. Often, you can also type `make uninstall' to remove the installed
+ files again.
+
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. You can give `configure'
-initial values for variables by setting them in the environment. Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
- CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
-Or on systems that have the `env' program, you can do it like this:
- env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
+own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory. After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
Installation Names
==================
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
Specifying the System Type
==========================
- There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on. Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
CPU-COMPANY-SYSTEM
-See the file `config.sub' for the possible values of each field. If
+where SYSTEM can have one of these forms:
+
+ OS
+ KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
- If you are building compiler tools for cross-compiling, you can also
-use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
Sharing Defaults
================
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
-Operation Controls
+Defining Variables
==================
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
`configure' recognizes the following options to control how it
operates.
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
`--cache-file=FILE'
- Use and save the results of the tests in FILE instead of
- `./config.cache'. Set FILE to `/dev/null' to disable caching, for
- debugging `configure'.
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
-`--help'
- Print a summary of the options to `configure', and exit.
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
-`--version'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
+`--prefix=DIR'
+ Use DIR as the installation prefix. *Note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
-`configure' also accepts some other, not widely useful, options.
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.64.
+# Generated by GNU Autoconf 2.64 for CTSim 5.1.3.
+#
+# Report bugs to <ctsim-users@b9.com>.
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
$as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
$as_echo "$0: be upgraded to zsh 4.3.4 or later."
else
- $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
-$0: including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
+ $as_echo "$0: Please tell bug-autoconf@gnu.org and ctsim-users@b9.com
+$0: about your system, including any error possibly output
+$0: before this message. Then install a modern shell, or
+$0: manually run the script under such a shell if you do
+$0: have one."
fi
exit 1
fi
MAKEFLAGS=
# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-PACKAGE_URL=
+PACKAGE_NAME='CTSim'
+PACKAGE_TARNAME='ctsim'
+PACKAGE_VERSION='5.1.3'
+PACKAGE_STRING='CTSim 5.1.3'
+PACKAGE_BUGREPORT='ctsim-users@b9.com'
+PACKAGE_URL='http://www.ctsim.org/'
ac_unique_file="src/ctsim.cpp"
# Factoring default headers for most tests.
localstatedir='${prefix}/var'
includedir='${prefix}/include'
oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE}'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
infodir='${datarootdir}/info'
htmldir='${docdir}'
dvidir='${docdir}'
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
+\`configure' configures CTSim 5.1.3 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/ctsim]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
fi
if test -n "$ac_init_help"; then
-
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of CTSim 5.1.3:";;
+ esac
cat <<\_ACEOF
Optional Features:
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
-Report bugs to the package provider.
+Report bugs to <ctsim-users@b9.com>.
+CTSim home page: <http://www.ctsim.org/>.
_ACEOF
ac_status=$?
fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-configure
+CTSim configure 5.1.3
generated by GNU Autoconf 2.64
Copyright (C) 2009 Free Software Foundation, Inc.
$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( cat <<\_ASBOX
+## --------------------------------- ##
+## Report this to ctsim-users@b9.com ##
+## --------------------------------- ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by $as_me, which was
+It was created by CTSim $as_me 5.1.3, which was
generated by GNU Autoconf 2.64. Invocation command line was
$ $0 $@
# Define the identity of the package.
- PACKAGE=ctsim
- VERSION=5.1.2
+ PACKAGE='ctsim'
+ VERSION='5.1.3'
cat >>confdefs.h <<_ACEOF
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by $as_me, which was
+This file was extended by CTSim $as_me 5.1.3, which was
generated by GNU Autoconf 2.64. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
Configuration commands:
$config_commands
-Report bugs to the package provider."
+Report bugs to <ctsim-users@b9.com>.
+CTSim home page: <http://www.ctsim.org/>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_version="\\
-config.status
+CTSim config.status 5.1.3
configured by $0, generated by GNU Autoconf 2.64,
with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
dnl Must reset CDPATH so that bash's cd does not print to stdout
dnl CDPATH=
-AC_INIT
+AC_INIT([CTSim], [5.1.3], [ctsim-users@b9.com], [ctsim], [http://www.ctsim.org/])
AC_CONFIG_SRCDIR([src/ctsim.cpp])
AM_MAINTAINER_MODE
-AM_INIT_AUTOMAKE(ctsim,5.1.2)
+AM_INIT_AUTOMAKE
AM_CONFIG_HEADER(config.h)
dnl Checks for programs.
+ctsim (5.1.3-1) unstable; urgency=low
+
+ * New upstream
+
+ -- Kevin M. Rosenberg <kmr@debian.org> Sat, 22 Aug 2009 17:22:16 -0600
+
ctsim (5.1.2-1) unstable; urgency=low
* New upstream
#! /bin/sh
-
# depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000, 2003 Free Software Foundation, Inc.
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputing dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
-# `libtool' can also be set to `yes' or `no'.
-
-if test -z "$depfile"; then
- base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
- dir=`echo "$object" | sed 's,/.*$,/,'`
- if test "$dir" = "$object"; then
- dir=
- fi
- # FIXME: should be _deps on DOS.
- depfile="$dir.deps/$base"
-fi
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
depmode=dashmstdout
fi
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u="sed s,\\\\\\\\,/,g"
+ depmode=msvisualcpp
+fi
+
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
- "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
stat=$?
if test $stat -eq 0; then :
else
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
tr '
-' ' ' >> $depfile
- echo >> $depfile
+' ' ' >> "$depfile"
+ echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
tr ' ' '
' < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> $depfile
+ >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
# current directory. Also, the AIX compiler puts `$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
- if test -f "$tmpdepfile"; then :
- else
- stripped=`echo "$stripped" | sed 's,^.*/,,'`
- tmpdepfile="$stripped.u"
- fi
-
if test $stat -eq 0; then :
else
- rm -f "$tmpdepfile"
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
if test -f "$tmpdepfile"; then
- outname="$stripped.o"
# Each line is of the form `foo.o: dependent.h'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
else
# The sourcefile does not contain any dependencies, so just
# store a dummy comment line, to avoid errors with the Makefile
rm -f "$tmpdepfile"
;;
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add `dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
if test "$libtool" = yes; then
- tmpdepfile1="$dir.libs/$base.lo.d"
- tmpdepfile2="$dir.libs/$base.d"
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mechanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD
else
- tmpdepfile1="$dir$base.o.d"
- tmpdepfile2="$dir$base.d"
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
"$@" -MD
fi
stat=$?
if test $stat -eq 0; then :
else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
exit $stat
fi
- if test -f "$tmpdepfile1"; then
- tmpdepfile="$tmpdepfile1"
- else
- tmpdepfile="$tmpdepfile2"
- fi
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
# That's a tab and a space in the [].
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
+ while test "X$1" != 'X--mode=compile'; do
shift
done
shift
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
+ while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
- cleared=no
- for arg in "$@"; do
+ cleared=no eat=no
+ for arg
+ do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
# Remove the call to Libtool.
if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
+ while test "X$1" != 'X--mode=compile'; do
shift
done
shift
done
"$@" -E |
- sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
+ # always write the preprocessed file to stdout.
"$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
IFS=" "
for arg
do
case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
;;
esac
done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
none)
exec "$@"
;;
esac
exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
#!/bin/sh
-#
# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
+
+scriptversion=2009-04-28.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
-# Copyright 1991 by the Massachusetts Institute of Technology
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
+#
+# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
+# from scratch.
+nl='
+'
+IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd="$stripprog"
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
else
- true
+ doit_exec=$doit
fi
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- chmodcmd=""
- else
- instcmd=mkdir
- fi
-else
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
+posix_mkdir=
- if [ -f $src -o -d $src ]
- then
- true
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- true
- fi
+# Desired mode of installed file.
+mode=0755
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- true
- fi
-fi
+src=
+dst=
+dir_arg=
+dst_arg=
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+copy_on_change=false
+no_target_directory=
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-'
-IFS="${IFS-${defaultIFS}}"
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
-pathcomp=''
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
- else
- true
- fi
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
- pathcomp="${pathcomp}/"
-done
-fi
+ -C) copy_on_change=true;;
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
+ -d) dir_arg=true;;
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
-# If we're going to rename the final executable, determine the name now.
+ --help) echo "$usage"; exit $?;;
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
- else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
- fi
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-# don't allow the sed command to completely eliminate the filename
+ -o) chowncmd="$chownprog $2"
+ shift;;
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
- else
- true
- fi
+ -s) stripcmd=$stripprog;;
-# Make a temp file name in the proper directory.
+ -t) dst_arg=$2
+ shift;;
- dsttmp=$dstdir/#inst.$$#
+ -T) no_target_directory=true;;
-# Move or copy the file name to the temp name
+ --version) echo "$0 $scriptversion"; exit $?;;
- $doit $instcmd $src $dsttmp &&
+ --) shift
+ break;;
- trap "rm -f ${dsttmp}" 0 &&
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
-# and set any options; do chmod last to preserve setuid bits
+ *) break;;
+ esac
+ shift
+done
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ done
+fi
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
-# Now rename the file to the real destination.
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dst_arg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst;;
+ esac
-fi &&
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ -*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ eval "$initialize_posix_glob"
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob set -f
+ set fnord $dstdir
+ shift
+ $posix_glob set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
+
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
-exit 0
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2005-06-08.21
+scriptversion=2009-04-28.21; # UTC
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
fi
run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
msg="missing on your system"
-case "$1" in
+case $1 in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
Send bug reports to <bug-automake@gnu.org>."
exit $?
;;
esac
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
-# the program).
-case "$1" in
- lex|yacc)
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
# Not GNU programs, they don't have --version.
;;
- tar)
+ tar*)
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
-case "$1" in
+case $program in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
touch aclocal.m4
;;
- autoconf)
+ autoconf*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
touch configure
;;
- autoheader)
+ autoheader*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case "$f" in
+ case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
while read f; do touch "$f"; done
;;
- autom4te)
+ autom4te*)
echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
fi
;;
- bison|yacc)
+ bison*|yacc*)
echo 1>&2 "\
WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if [ ! -f y.tab.h ]; then
+ if test ! -f y.tab.h; then
echo >y.tab.h
fi
- if [ ! -f y.tab.c ]; then
+ if test ! -f y.tab.c; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
- lex|flex)
+ lex*|flex*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if [ ! -f lex.yy.c ]; then
+ if test ! -f lex.yy.c; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
- help2man)
+ help2man*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
- exit 1
+ exit $?
fi
;;
- makeinfo)
+ makeinfo*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
touch $file
;;
- tar)
+ tar*)
shift
# We have already tried tar in the generic part.
fi
firstarg="$1"
if shift; then
- case "$firstarg" in
+ case $firstarg in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case "$firstarg" in
+ case $firstarg in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
# End:
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-# $Id: mkinstalldirs,v 1.13 1999/01/05 03:18:55 bje Exp $
+scriptversion=2009-04-28.21; # UTC
+
+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+nl='
+'
+IFS=" "" $nl"
errstatus=0
+dirmode=
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake@gnu.org>."
+
+# process command line arguments
+while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage"
+ exit $?
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --version)
+ echo "$0 $scriptversion"
+ exit $?
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
+done
for file
do
- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
- shift
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+done
+
+case $# in
+ 0) exit 0 ;;
+esac
+
+# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error. This is a problem when calling mkinstalldirs
+# from a parallel make. We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
+case $dirmode in
+ '')
+ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ test -d ./-p && rmdir ./-p
+ test -d ./--version && rmdir ./--version
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+ test ! -d ./--version; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ else
+ # Clean up after NextStep and OpenStep mkdir.
+ for d in ./-m ./-p ./--version "./$dirmode";
+ do
+ test -d $d && rmdir $d
+ done
+ fi
+ ;;
+esac
+
+for file
+do
+ case $file in
+ /*) pathcomp=/ ;;
+ *) pathcomp= ;;
+ esac
+ oIFS=$IFS
+ IFS=/
+ set fnord $file
+ shift
+ IFS=$oIFS
+
+ for d
+ do
+ test "x$d" = x && continue
+
+ pathcomp=$pathcomp$d
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
- pathcomp=
- for d
- do
- pathcomp="$pathcomp$d"
- case "$pathcomp" in
- -* ) pathcomp=./$pathcomp ;;
- esac
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
+ mkdir "$pathcomp" || lasterr=$?
- mkdir "$pathcomp" || lasterr=$?
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- fi
- fi
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
- pathcomp="$pathcomp/"
- done
+ pathcomp=$pathcomp/
+ done
done
exit $errstatus
-# mkinstalldirs ends here
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
// Create new documents
-ProjectionFileDocument*
-CTSimApp::newProjectionDoc()
-{
- wxString fname;
- m_docManager->MakeDefaultName(fname);
- fname += _T(".pj");
- ProjectionFileDocument* newDoc = dynamic_cast<ProjectionFileDocument*>(m_pDocTemplProjection->CreateDocument (fname));
+wxDocument*
+CTSimApp::newDocumentHelper (wxDocTemplate* tmpl) {
+ wxDocument* newDoc = tmpl->CreateDocument (_T(""));
if (newDoc) {
- newDoc->SetDocumentName (m_pDocTemplProjection->GetDocumentName());
- newDoc->SetDocumentTemplate (m_pDocTemplProjection);
+ newDoc->SetDocumentTemplate (tmpl);
newDoc->OnNewDocument();
- newDoc->SetFilename(fname);
+ wxString fname = newDoc->GetFilename();
+ fname += _T(".");
+ fname += tmpl->GetDefaultExtension();
+ newDoc->SetDocumentName(fname);
+ newDoc->SetTitle(fname);
+ newDoc->SetFilename(fname, true);
}
return newDoc;
}
+ProjectionFileDocument*
+CTSimApp::newProjectionDoc()
+{
+ ProjectionFileDocument* newDoc = dynamic_cast<ProjectionFileDocument*>
+ (newDocumentHelper(m_pDocTemplProjection));
+ if (newDoc)
+ newDoc->getView()->getFrame()->SetTitle(newDoc->GetDocumentName());
+ return newDoc;
+}
+
ImageFileDocument*
CTSimApp::newImageDoc()
{
- wxString fname;
- m_docManager->MakeDefaultName(fname);
- fname += _T(".if");
- ImageFileDocument* newDoc = dynamic_cast<ImageFileDocument*>(m_pDocTemplImage->CreateDocument (fname));
- if (newDoc) {
- newDoc->SetDocumentName (m_pDocTemplImage->GetDocumentName());
- newDoc->SetDocumentTemplate (m_pDocTemplImage);
- newDoc->OnNewDocument();
- newDoc->SetFilename(fname);
- }
+ ImageFileDocument* newDoc = dynamic_cast<ImageFileDocument*>
+ (newDocumentHelper(m_pDocTemplImage));
+ if (newDoc)
+ newDoc->getView()->getFrame()->SetTitle(newDoc->GetDocumentName());
return newDoc;
}
PlotFileDocument*
CTSimApp::newPlotDoc()
{
- wxString fname;
- m_docManager->MakeDefaultName(fname);
- fname += _T(".plt");
- PlotFileDocument* newDoc = dynamic_cast<PlotFileDocument*>(m_pDocTemplPlot->CreateDocument (fname));
- if (newDoc) {
- newDoc->SetDocumentName (m_pDocTemplPlot->GetDocumentName());
- newDoc->SetDocumentTemplate (m_pDocTemplPlot);
- newDoc->OnNewDocument();
- newDoc->SetFilename(fname);
- }
+ PlotFileDocument* newDoc = dynamic_cast<PlotFileDocument*>
+ (newDocumentHelper(m_pDocTemplPlot));
+ if (newDoc)
+ newDoc->getView()->getFrame()->SetTitle(newDoc->GetDocumentName());
return newDoc;
}
TextFileDocument*
CTSimApp::newTextDoc()
{
- wxString fname;
- m_docManager->MakeDefaultName(fname);
- fname += _T(".txt");
-
- TextFileDocument* newDoc = dynamic_cast<TextFileDocument*>(m_pDocTemplText->CreateDocument (fname));
- if (newDoc) {
- newDoc->SetDocumentName (m_pDocTemplText->GetDocumentName());
- newDoc->SetDocumentTemplate (m_pDocTemplText);
- newDoc->OnNewDocument();
- newDoc->SetFilename (fname);
- }
+ TextFileDocument* newDoc = dynamic_cast<TextFileDocument*>
+ (newDocumentHelper(m_pDocTemplText));
+ if (newDoc)
+ newDoc->getView()->getFrame()->SetTitle(newDoc->GetDocumentName());
return newDoc;
}
PhantomFileDocument*
CTSimApp::newPhantomDoc()
{
- wxString fname;
- m_docManager->MakeDefaultName(fname);
- fname += _T(".phm");
- PhantomFileDocument* newDoc = dynamic_cast<PhantomFileDocument*>(m_pDocTemplPhantom->CreateDocument (fname));
- if (newDoc) {
- newDoc->SetDocumentName (m_pDocTemplPhantom->GetDocumentName());
- newDoc->SetDocumentTemplate (m_pDocTemplPhantom);
- newDoc->OnNewDocument();
- newDoc->SetFilename(fname);
- }
+ PhantomFileDocument* newDoc = dynamic_cast<PhantomFileDocument*>
+ (newDocumentHelper(m_pDocTemplPhantom));
+ if (newDoc)
+ newDoc->getView()->getFrame()->SetTitle(newDoc->GetDocumentName());
return newDoc;
}
Graph3dFileDocument*
CTSimApp::newGraph3dDoc()
{
- wxString fname;
- m_docManager->MakeDefaultName(fname);
- fname += _T(".g3d");
- Graph3dFileDocument* newDoc = dynamic_cast<Graph3dFileDocument*>(m_pDocTemplGraph3d->CreateDocument (fname));
- if (newDoc) {
- newDoc->SetDocumentName (m_pDocTemplGraph3d->GetDocumentName());
- newDoc->SetDocumentTemplate (m_pDocTemplGraph3d);
- newDoc->OnNewDocument();
- newDoc->SetFilename(fname);
- }
+ Graph3dFileDocument* newDoc = dynamic_cast<Graph3dFileDocument*>
+ (newDocumentHelper(m_pDocTemplGraph3d));
+ if (newDoc)
+ newDoc->getView()->getFrame()->SetTitle(newDoc->GetDocumentName());
return newDoc;
}
bool m_bPrintCmdLineImages;
bool m_bCmdLineVerboseFlag;
+ wxDocument* newDocumentHelper (wxDocTemplate* tmpl);
+
public:
CTSimApp();
void OnInitCmdLine(wxCmdLineParser& parser);