;;;; cmucl-help mailing-list hosted at cons.org, in November 2001 and
;;;; has been placed into the public domain.
;;;;
-;;;; $Id: md5.lisp,v 1.1 2002/11/11 11:11:22 kevin Exp $
-;;;;
;;;; While the implementation should work on all conforming Common
;;;; Lisp implementations, it has only been optimized for CMU CL,
;;;; where it achieved comparable performance to the standard md5sum
;;;; *features* prior to compilation. In that case evaluating
;;;; (md5::test-rfc1321) will run all the test-cases present in
;;;; Appendix A.5 of RFC 1321 and report on the results.
+;;;; Evaluating (md5::test-other) will run further test-cases
+;;;; gathered by the author to cover regressions, etc.
;;;;
;;;; This software is "as is", and has no warranty of any kind. The
;;;; authors assume no responsibility for the consequences of any use
;;; Section 2: Basic Datatypes
+#-lispworks
+(eval-when (:compile-toplevel :load-toplevel :execute)
+ (deftype ub32 ()
+ "Corresponds to the 32bit quantity word of the MD5 Spec"
+ `(unsigned-byte 32)))
+
+#+lispworks
(deftype ub32 ()
- "Corresponds to the 32bit quantity word of the MD5 Spec"
- `(unsigned-byte 32))
+ "Corresponds to the 32bit quantity word of the MD5 Spec"
+ `(unsigned-byte 32))
-(defmacro assemble-ub32 (a b c d)
- "Assemble an ub32 value from the given (unsigned-byte 8) values,
+(eval-when (:compile-toplevel :load-toplevel :execute)
+ (defmacro assemble-ub32 (a b c d)
+ "Assemble an ub32 value from the given (unsigned-byte 8) values,
where a is the intended low-order byte and d the high-order byte."
- `(the ub32 (logior (ash ,d 24) (ash ,c 16) (ash ,b 8) ,a)))
+ `(the ub32 (logior (ash ,d 24) (ash ,c 16) (ash ,b 8) ,a))))
;;; Section 3.4: Auxilliary functions
(declaim (inline f g h i)
- (ftype (function (ub32 ub32 ub32) ub32) f g h i))
+ (ftype (function (ub32 ub32 ub32) ub32) f g h i))
(defun f (x y z)
(declare (type ub32 x y z)
- (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
#+cmu
(kernel:32bit-logical-or (kernel:32bit-logical-and x y)
- (kernel:32bit-logical-andc1 x z))
+ (kernel:32bit-logical-andc1 x z))
#-cmu
(logior (logand x y) (logandc1 x z)))
(defun g (x y z)
(declare (type ub32 x y z)
- (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
#+cmu
(kernel:32bit-logical-or (kernel:32bit-logical-and x z)
- (kernel:32bit-logical-andc2 y z))
+ (kernel:32bit-logical-andc2 y z))
#-cmu
(logior (logand x z) (logandc2 y z)))
(defun h (x y z)
(declare (type ub32 x y z)
- (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
#+cmu
(kernel:32bit-logical-xor x (kernel:32bit-logical-xor y z))
#-cmu
(defun i (x y z)
(declare (type ub32 x y z)
- (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
#+cmu
(kernel:32bit-logical-xor y (kernel:32bit-logical-orc2 x z))
#-cmu
- (logxor y (logorc2 x z)))
+ (ldb (byte 32 0) (logxor y (logorc2 x z))))
(declaim (inline mod32+)
- (ftype (function (ub32 ub32) ub32) mod32+))
+ (ftype (function (ub32 ub32) ub32) mod32+))
(defun mod32+ (a b)
(declare (type ub32 a b) (optimize (speed 3) (safety 0) (space 0) (debug 0)))
(ldb (byte 32 0) (+ a b)))
`(ext:truly-the ub32 (+ ,a ,b)))
(declaim (inline rol32)
- (ftype (function (ub32 (unsigned-byte 5)) ub32) rol32))
+ (ftype (function (ub32 (unsigned-byte 5)) ub32) rol32))
(defun rol32 (a s)
(declare (type ub32 a) (type (unsigned-byte 5) s)
- (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
#+cmu
(kernel:32bit-logical-or #+little-endian (kernel:shift-towards-end a s)
- #+big-endian (kernel:shift-towards-start a s)
- (ash a (- s 32)))
+ #+big-endian (kernel:shift-towards-start a s)
+ (ash a (- s 32)))
#-cmu
(logior (ldb (byte 32 0) (ash a s)) (ash a (- s 32))))
(eval-when (:compile-toplevel :load-toplevel :execute)
(defparameter *t* (make-array 64 :element-type 'ub32
- :initial-contents
- (loop for i from 1 to 64
- collect
- (truncate
- (* 4294967296
- (abs (sin (float i 0.0d0)))))))))
+ :initial-contents
+ (loop for i from 1 to 64
+ collect
+ (truncate
+ (* 4294967296
+ (abs (sin (float i 0.0d0)))))))))
;;; Section 3.4: Helper Macro for single round definitions
(defmacro with-md5-round ((op block) &rest clauses)
(loop for (a b c d k s i) in clauses
- collect
- `(setq ,a (mod32+ ,b (rol32 (mod32+ (mod32+ ,a (,op ,b ,c ,d))
- (mod32+ (aref ,block ,k)
- ,(aref *t* (1- i))))
- ,s)))
- into result
- finally
- (return `(progn ,@result))))
+ collect
+ `(setq ,a (mod32+ ,b (rol32 (mod32+ (mod32+ ,a (,op ,b ,c ,d))
+ (mod32+ (aref ,block ,k)
+ ,(aref *t* (1- i))))
+ ,s)))
+ into result
+ finally
+ (return `(progn ,@result))))
;;; Section 3.3: (Initial) MD5 Working Set
(let ((regs (make-array 4 :element-type '(unsigned-byte 32))))
(declare (type md5-regs regs))
(setf (md5-regs-a regs) +md5-magic-a+
- (md5-regs-b regs) +md5-magic-b+
- (md5-regs-c regs) +md5-magic-c+
- (md5-regs-d regs) +md5-magic-d+)
+ (md5-regs-b regs) +md5-magic-b+
+ (md5-regs-c regs) +md5-magic-c+
+ (md5-regs-d regs) +md5-magic-d+)
regs))
;;; Section 3.4: Operation on 16-Word Blocks
word block of input, and updates the working state in A, B, C, and D
accordingly."
(declare (type md5-regs regs)
- (type (simple-array ub32 (16)) block)
- (optimize (speed 3) (safety 0) (space 0) (debug 0)))
- (let ((a (md5-regs-a regs)) (b (md5-regs-b regs))
- (c (md5-regs-c regs)) (d (md5-regs-d regs)))
- (declare (type ub32 a b c d))
+ (type (simple-array ub32 (16)) block)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (let ((A (md5-regs-a regs)) (B (md5-regs-b regs))
+ (C (md5-regs-c regs)) (D (md5-regs-d regs)))
+ (declare (type ub32 A B C D))
;; Round 1
(with-md5-round (f block)
(A B C D 0 7 1)(D A B C 1 12 2)(C D A B 2 17 3)(B C D A 3 22 4)
(A B C D 8 6 57)(D A B C 15 10 58)(C D A B 6 15 59)(B C D A 13 21 60)
(A B C D 4 6 61)(D A B C 11 10 62)(C D A B 2 15 63)(B C D A 9 21 64))
;; Update and return
- (setf (md5-regs-a regs) (mod32+ (md5-regs-a regs) a)
- (md5-regs-b regs) (mod32+ (md5-regs-b regs) b)
- (md5-regs-c regs) (mod32+ (md5-regs-c regs) c)
- (md5-regs-d regs) (mod32+ (md5-regs-d regs) d))
+ (setf (md5-regs-a regs) (mod32+ (md5-regs-a regs) A)
+ (md5-regs-b regs) (mod32+ (md5-regs-b regs) B)
+ (md5-regs-c regs) (mod32+ (md5-regs-c regs) C)
+ (md5-regs-d regs) (mod32+ (md5-regs-d regs) D))
regs))
;;; Section 3.4: Converting 8bit-vectors into 16-Word Blocks
(declaim (inline fill-block fill-block-ub8 fill-block-char))
-(defun fill-block (block buffer offset)
- "Convert a complete 64 byte input vector segment into the given 16
-word MD5 block. This currently works on (unsigned-byte 8) and
-character simple-arrays, via the functions `fill-block-ub8' and
-`fill-block-char' respectively."
- (declare (type (integer 0 #.(- most-positive-fixnum 64)) offset)
- (type (simple-array ub32 (16)) block)
- (type (simple-array * (*)) buffer)
- (optimize (speed 3) (safety 0) (space 0) (debug 0)))
- (etypecase buffer
- ((simple-array (unsigned-byte 8) (*))
- (fill-block-ub8 block buffer offset))
- (simple-string
- (fill-block-char block buffer offset))))
(defun fill-block-ub8 (block buffer offset)
"Convert a complete 64 (unsigned-byte 8) input vector segment
starting from offset into the given 16 word MD5 block."
(declare (type (integer 0 #.(- most-positive-fixnum 64)) offset)
- (type (simple-array ub32 (16)) block)
- (type (simple-array (unsigned-byte 8) (*)) buffer)
- (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (type (simple-array ub32 (16)) block)
+ (type (simple-array (unsigned-byte 8) (*)) buffer)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
#+(and :cmu :little-endian)
(kernel:bit-bash-copy
buffer (+ (* vm:vector-data-offset vm:word-bits) (* offset vm:byte-bits))
(* 64 vm:byte-bits))
#-(and :cmu :little-endian)
(loop for i of-type (integer 0 16) from 0
- for j of-type (integer 0 #.most-positive-fixnum)
- from offset to (+ offset 63) by 4
- do
- (setf (aref block i)
- (assemble-ub32 (aref buffer j)
- (aref buffer (+ j 1))
- (aref buffer (+ j 2))
- (aref buffer (+ j 3))))))
+ for j of-type (integer 0 #.most-positive-fixnum)
+ from offset to (+ offset 63) by 4
+ do
+ (setf (aref block i)
+ (assemble-ub32 (aref buffer j)
+ (aref buffer (+ j 1))
+ (aref buffer (+ j 2))
+ (aref buffer (+ j 3))))))
(defun fill-block-char (block buffer offset)
"Convert a complete 64 character input string segment starting from
offset into the given 16 word MD5 block."
(declare (type (integer 0 #.(- most-positive-fixnum 64)) offset)
- (type (simple-array ub32 (16)) block)
- (type simple-string buffer)
- (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (type (simple-array ub32 (16)) block)
+ (type simple-string buffer)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
#+(and :cmu :little-endian)
(kernel:bit-bash-copy
buffer (+ (* vm:vector-data-offset vm:word-bits) (* offset vm:byte-bits))
(* 64 vm:byte-bits))
#-(and :cmu :little-endian)
(loop for i of-type (integer 0 16) from 0
- for j of-type (integer 0 #.most-positive-fixnum)
- from offset to (+ offset 63) by 4
- do
- (setf (aref block i)
- (assemble-ub32 (char-code (schar buffer j))
- (char-code (schar buffer (+ j 1)))
- (char-code (schar buffer (+ j 2)))
- (char-code (schar buffer (+ j 3)))))))
+ for j of-type (integer 0 #.most-positive-fixnum)
+ from offset to (+ offset 63) by 4
+ do
+ (setf (aref block i)
+ (assemble-ub32 (char-code (schar buffer j))
+ (char-code (schar buffer (+ j 1)))
+ (char-code (schar buffer (+ j 2)))
+ (char-code (schar buffer (+ j 3)))))))
+
+(defun fill-block (block buffer offset)
+ "Convert a complete 64 byte input vector segment into the given 16
+word MD5 block. This currently works on (unsigned-byte 8) and
+character simple-arrays, via the functions `fill-block-ub8' and
+`fill-block-char' respectively."
+ (declare (type (integer 0 #.(- most-positive-fixnum 64)) offset)
+ (type (simple-array ub32 (16)) block)
+ (type (simple-array * (*)) buffer)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (etypecase buffer
+ ((simple-array (unsigned-byte 8) (*))
+ (fill-block-ub8 block buffer offset))
+ (simple-string
+ (fill-block-char block buffer offset))))
;;; Section 3.5: Message Digest Output
"Create the final 16 byte message-digest from the MD5 working state
in regs. Returns a (simple-array (unsigned-byte 8) (16))."
(declare (optimize (speed 3) (safety 0) (space 0) (debug 0))
- (type md5-regs regs))
+ (type md5-regs regs))
(let ((result (make-array 16 :element-type '(unsigned-byte 8))))
(declare (type (simple-array (unsigned-byte 8) (16)) result))
(macrolet ((frob (reg offset)
- (let ((var (gensym)))
- `(let ((,var ,reg))
- (declare (type ub32 ,var))
- (setf
- (aref result ,offset) (ldb (byte 8 0) ,var)
- (aref result ,(+ offset 1)) (ldb (byte 8 8) ,var)
- (aref result ,(+ offset 2)) (ldb (byte 8 16) ,var)
- (aref result ,(+ offset 3)) (ldb (byte 8 24) ,var))))))
+ (let ((var (gensym)))
+ `(let ((,var ,reg))
+ (declare (type ub32 ,var))
+ (setf
+ (aref result ,offset) (ldb (byte 8 0) ,var)
+ (aref result ,(+ offset 1)) (ldb (byte 8 8) ,var)
+ (aref result ,(+ offset 2)) (ldb (byte 8 16) ,var)
+ (aref result ,(+ offset 3)) (ldb (byte 8 24) ,var))))))
(frob (md5-regs-a regs) 0)
(frob (md5-regs-b regs) 4)
(frob (md5-regs-c regs) 8)
;;; Mid-Level Drivers
(defstruct (md5-state
- (:constructor make-md5-state ())
- (:copier))
+ (:constructor make-md5-state ())
+ (:copier))
(regs (initial-md5-regs) :type md5-regs :read-only t)
(amount 0 :type
- #-md5-small-length (integer 0 *)
- #+md5-small-length (unsigned-byte 29))
+ #-md5-small-length (integer 0 *)
+ #+md5-small-length (unsigned-byte 29))
(block (make-array 16 :element-type '(unsigned-byte 32)) :read-only t
- :type (simple-array (unsigned-byte 32) (16)))
+ :type (simple-array (unsigned-byte 32) (16)))
(buffer (make-array 64 :element-type '(unsigned-byte 8)) :read-only t
- :type (simple-array (unsigned-byte 8) (64)))
+ :type (simple-array (unsigned-byte 8) (64)))
(buffer-index 0 :type (integer 0 63))
(finalized-p nil))
from-offset and copying count elements into the 64 byte buffer
starting at buffer-offset."
(declare (optimize (speed 3) (safety 0) (space 0) (debug 0))
- (type (unsigned-byte 29) from-offset)
- (type (integer 0 63) count buffer-offset)
- (type (simple-array * (*)) from)
- (type (simple-array (unsigned-byte 8) (64)) buffer))
+ (type (unsigned-byte 29) from-offset)
+ (type (integer 0 63) count buffer-offset)
+ (type (simple-array * (*)) from)
+ (type (simple-array (unsigned-byte 8) (64)) buffer))
#+cmu
(kernel:bit-bash-copy
from (+ (* vm:vector-data-offset vm:word-bits) (* from-offset vm:byte-bits))
buffer (+ (* vm:vector-data-offset vm:word-bits)
- (* buffer-offset vm:byte-bits))
+ (* buffer-offset vm:byte-bits))
(* count vm:byte-bits))
#-cmu
(etypecase from
(simple-string
(loop for buffer-index of-type (integer 0 64) from buffer-offset
- for from-index of-type fixnum from from-offset
- below (+ from-offset count)
- do
- (setf (aref buffer buffer-index)
- (char-code (schar (the simple-string from) from-index)))))
+ for from-index of-type fixnum from from-offset
+ below (+ from-offset count)
+ do
+ (setf (aref buffer buffer-index)
+ (char-code (schar (the simple-string from) from-index)))))
((simple-array (unsigned-byte 8) (*))
(loop for buffer-index of-type (integer 0 64) from buffer-offset
- for from-index of-type fixnum from from-offset
- below (+ from-offset count)
- do
- (setf (aref buffer buffer-index)
- (aref (the (simple-array (unsigned-byte 8) (*)) from)
- from-index))))))
+ for from-index of-type fixnum from from-offset
+ below (+ from-offset count)
+ do
+ (setf (aref buffer buffer-index)
+ (aref (the (simple-array (unsigned-byte 8) (*)) from)
+ from-index))))))
(defun update-md5-state (state sequence &key (start 0) (end (length sequence)))
"Update the given md5-state from sequence, which is either a
simple-string or a simple-array with element-type (unsigned-byte 8),
bounded by start and end, which must be numeric bounding-indices."
(declare (type md5-state state)
- (type (simple-array * (*)) sequence)
- (type fixnum start end)
- (optimize (speed 3) #+cmu (safety 0) (space 0) (debug 0))
- #+cmu
- (ext:optimize-interface (safety 1) (debug 1)))
+ (type (simple-array * (*)) sequence)
+ (type fixnum start end)
+ (optimize (speed 3) #+cmu (safety 0) (space 0) (debug 0))
+ #+cmu
+ (ext:optimize-interface (safety 1) (debug 1)))
(let ((regs (md5-state-regs state))
- (block (md5-state-block state))
- (buffer (md5-state-buffer state))
- (buffer-index (md5-state-buffer-index state))
- (length (- end start)))
- (declare (type md5-regs regs) (type fixnum length)
- (type (integer 0 63) buffer-index)
- (type (simple-array (unsigned-byte 32) (16)) block)
- (type (simple-array (unsigned-byte 8) (64)) buffer))
+ (block (md5-state-block state))
+ (buffer (md5-state-buffer state)))
+ (declare (type md5-regs regs)
+ (type (simple-array (unsigned-byte 32) (16)) block)
+ (type (simple-array (unsigned-byte 8) (64)) buffer))
;; Handle old rest
- (unless (zerop buffer-index)
- (let ((amount (min (- 64 buffer-index) length)))
- (declare (type (integer 0 63) amount))
- (copy-to-buffer sequence start amount buffer buffer-index)
- (setq start (the fixnum (+ start amount)))
- (when (>= start end)
- (setf (md5-state-buffer-index state) (+ buffer-index amount))
- (return-from update-md5-state state)))
- (fill-block-ub8 block buffer 0)
- (update-md5-block regs block))
+ (unless (zerop (md5-state-buffer-index state))
+ (let* ((buffer-index (md5-state-buffer-index state))
+ (remainder (- 64 buffer-index))
+ (length (- end start))
+ (amount (min remainder length)))
+ (declare (type (integer 0 63) buffer-index remainder amount)
+ (type fixnum length))
+ (copy-to-buffer sequence start amount buffer buffer-index)
+ (setf (md5-state-amount state)
+ #-md5-small-length (+ (md5-state-amount state) amount)
+ #+md5-small-length (the (unsigned-byte 29)
+ (+ (md5-state-amount state) amount)))
+ (setq start (the fixnum (+ start amount)))
+ (if (< length remainder)
+ (setf (md5-state-buffer-index state)
+ (the (integer 0 63) (+ buffer-index amount)))
+ (progn
+ (fill-block-ub8 block buffer 0)
+ (update-md5-block regs block)
+ (setf (md5-state-buffer-index state) 0)))))
+ ;; Leave when nothing to do
+ (when (>= start end)
+ (return-from update-md5-state state))
;; Handle main-part and new-rest
(etypecase sequence
((simple-array (unsigned-byte 8) (*))
(locally
- (declare (type (simple-array (unsigned-byte 8) (*)) sequence))
- (loop for offset of-type (unsigned-byte 29) from start below end by 64
- until (< (- end offset) 64)
- do
- (fill-block-ub8 block sequence offset)
- (update-md5-block regs block)
- finally
- (let ((amount (- end offset)))
- (unless (zerop amount)
- (copy-to-buffer sequence offset amount buffer 0))
- (setf (md5-state-buffer-index state) amount)))))
+ (declare (type (simple-array (unsigned-byte 8) (*)) sequence))
+ (loop for offset of-type (unsigned-byte 29) from start below end by 64
+ until (< (- end offset) 64)
+ do
+ (fill-block-ub8 block sequence offset)
+ (update-md5-block regs block)
+ finally
+ (let ((amount (- end offset)))
+ (unless (zerop amount)
+ (copy-to-buffer sequence offset amount buffer 0))
+ (setf (md5-state-buffer-index state) amount)))))
(simple-string
(locally
- (declare (type simple-string sequence))
- (loop for offset of-type (unsigned-byte 29) from start below end by 64
- until (< (- end offset) 64)
- do
- (fill-block-char block sequence offset)
- (update-md5-block regs block)
- finally
- (let ((amount (- end offset)))
- (unless (zerop amount)
- (copy-to-buffer sequence offset amount buffer 0))
- (setf (md5-state-buffer-index state) amount))))))
+ (declare (type simple-string sequence))
+ (loop for offset of-type (unsigned-byte 29) from start below end by 64
+ until (< (- end offset) 64)
+ do
+ (fill-block-char block sequence offset)
+ (update-md5-block regs block)
+ finally
+ (let ((amount (- end offset)))
+ (unless (zerop amount)
+ (copy-to-buffer sequence offset amount buffer 0))
+ (setf (md5-state-buffer-index state) amount))))))
(setf (md5-state-amount state)
- #-md5-small-length (+ (md5-state-amount state) length)
- #+md5-small-length (the (unsigned-byte 29)
- (+ (md5-state-amount state) length)))
+ #-md5-small-length (+ (md5-state-amount state)
+ (the fixnum (- end start)))
+ #+md5-small-length (the (unsigned-byte 29)
+ (+ (md5-state-amount state)
+ (the fixnum (- end start)))))
state))
(defun finalize-md5-state (state)
(unsigned-byte 8) values. Calling `update-md5-state' after a call to
`finalize-md5-state' results in unspecified behaviour."
(declare (type md5-state state)
- (optimize (speed 3) #+cmu (safety 0) (space 0) (debug 0))
- #+cmu
- (ext:optimize-interface (safety 1) (debug 1)))
+ (optimize (speed 3) #+cmu (safety 0) (space 0) (debug 0))
+ #+cmu
+ (ext:optimize-interface (safety 1) (debug 1)))
(or (md5-state-finalized-p state)
(let ((regs (md5-state-regs state))
- (block (md5-state-block state))
- (buffer (md5-state-buffer state))
- (buffer-index (md5-state-buffer-index state))
- (total-length (* 8 (md5-state-amount state))))
- (declare (type md5-regs regs)
- (type (integer 0 63) buffer-index)
- (type (simple-array ub32 (16)) block)
- (type (simple-array (unsigned-byte 8) (*)) buffer))
- (setf (aref buffer buffer-index) #x80)
- (loop for index of-type (integer 0 64)
- from (1+ buffer-index) below 64
- do (setf (aref buffer index) #x00))
- (fill-block-ub8 block buffer 0)
- (when (< buffer-index 56)
- (setf (aref block 14) (ldb (byte 32 0) total-length))
- #-md5-small-length
- (setf (aref block 15) (ldb (byte 32 32) total-length)))
- (update-md5-block regs block)
- (when (< 56 buffer-index 64)
- (loop for index of-type (integer 0 16) from 0 below 16
- do (setf (aref block index) #x00000000))
- (setf (aref block 14) (ldb (byte 32 0) total-length))
- #-md5-small-length
- (setf (aref block 15) (ldb (byte 32 32) total-length))
- (update-md5-block regs block))
- (setf (md5-state-finalized-p state)
- (md5regs-digest regs)))))
+ (block (md5-state-block state))
+ (buffer (md5-state-buffer state))
+ (buffer-index (md5-state-buffer-index state))
+ (total-length (* 8 (md5-state-amount state))))
+ (declare (type md5-regs regs)
+ (type (integer 0 63) buffer-index)
+ (type (simple-array ub32 (16)) block)
+ (type (simple-array (unsigned-byte 8) (*)) buffer))
+ ;; Add mandatory bit 1 padding
+ (setf (aref buffer buffer-index) #x80)
+ ;; Fill with 0 bit padding
+ (loop for index of-type (integer 0 64)
+ from (1+ buffer-index) below 64
+ do (setf (aref buffer index) #x00))
+ (fill-block-ub8 block buffer 0)
+ ;; Flush block first if length wouldn't fit
+ (when (>= buffer-index 56)
+ (update-md5-block regs block)
+ ;; Create new fully 0 padded block
+ (loop for index of-type (integer 0 16) from 0 below 16
+ do (setf (aref block index) #x00000000)))
+ ;; Add 64bit message bit length
+ (setf (aref block 14) (ldb (byte 32 0) total-length))
+ #-md5-small-length
+ (setf (aref block 15) (ldb (byte 32 32) total-length))
+ ;; Flush last block
+ (update-md5-block regs block)
+ ;; Done, remember digest for later calls
+ (setf (md5-state-finalized-p state)
+ (md5regs-digest regs)))))
;;; High-Level Drivers
underlying MD5 routines, on other implementations it only works for 1d
simple-arrays with such element types."
(declare (optimize (speed 3) (space 0) (debug 0))
- (type vector sequence) (type fixnum start))
+ (type vector sequence) (type fixnum start))
(let ((state (make-md5-state)))
(declare (type md5-state state))
#+cmu
(update-md5-state state sequence :start start :end real-end))
(finalize-md5-state state)))
-(defconstant +buffer-size+ (* 128 1024)
- "Size of internal buffer to use for md5sum-stream and md5sum-file
-operations. This should be a multiple of 64, the MD5 block size.")
+(eval-when (:compile-toplevel :load-toplevel :execute)
+ (defconstant +buffer-size+ (* 128 1024)
+ "Size of internal buffer to use for md5sum-stream and md5sum-file
+operations. This should be a multiple of 64, the MD5 block size."))
(deftype buffer-index () `(integer 0 ,+buffer-size+))
(cond
((equal (stream-element-type stream) '(unsigned-byte 8))
(let ((buffer (make-array +buffer-size+
- :element-type '(unsigned-byte 8))))
- (declare (type (simple-array (unsigned-byte 8) (#.+buffer-size+))
- buffer))
- (loop for bytes of-type buffer-index = (read-sequence buffer stream)
- do (update-md5-state state buffer :end bytes)
- until (< bytes +buffer-size+)
- finally
- (return (finalize-md5-state state)))))
+ :element-type '(unsigned-byte 8))))
+ (declare (type (simple-array (unsigned-byte 8) (#.+buffer-size+))
+ buffer))
+ (loop for bytes of-type buffer-index = (read-sequence buffer stream)
+ do (update-md5-state state buffer :end bytes)
+ until (< bytes +buffer-size+)
+ finally
+ (return (finalize-md5-state state)))))
((equal (stream-element-type stream) 'character)
(let ((buffer (make-string +buffer-size+)))
- (declare (type (simple-string #.+buffer-size+) buffer))
- (loop for bytes of-type buffer-index = (read-sequence buffer stream)
- do (update-md5-state state buffer :end bytes)
- until (< bytes +buffer-size+)
- finally
- (return (finalize-md5-state state)))))
+ (declare (type (simple-string #.+buffer-size+) buffer))
+ (loop for bytes of-type buffer-index = (read-sequence buffer stream)
+ do (update-md5-state state buffer :end bytes)
+ until (< bytes +buffer-size+)
+ finally
+ (return (finalize-md5-state state)))))
(t
(error "Unsupported stream element-type ~S for stream ~S."
- (stream-element-type stream) stream)))))
+ (stream-element-type stream) stream)))))
(defun md5sum-file (pathname)
"Calculate the MD5 message-digest of the file specified by pathname."
according to the test suite in Appendix A.5 of RFC 1321")
#+md5-testing
-(defun test-rfc1321 ()
+(defconstant +other-testsuite+
+ '(;; From padding bug report by Edi Weitz
+ ("1631901HERR BUCHHEISTERCITROEN NORD1043360796beckenbauer" .
+ "d734945e5930bb28859ccd13c830358b")
+ ;; Test padding for strings from 0 to 69*8 bits in size.
+ ("" . "d41d8cd98f00b204e9800998ecf8427e")
+ ("a" . "0cc175b9c0f1b6a831c399e269772661")
+ ("aa" . "4124bc0a9335c27f086f24ba207a4912")
+ ("aaa" . "47bce5c74f589f4867dbd57e9ca9f808")
+ ("aaaa" . "74b87337454200d4d33f80c4663dc5e5")
+ ("aaaaa" . "594f803b380a41396ed63dca39503542")
+ ("aaaaaa" . "0b4e7a0e5fe84ad35fb5f95b9ceeac79")
+ ("aaaaaaa" . "5d793fc5b00a2348c3fb9ab59e5ca98a")
+ ("aaaaaaaa" . "3dbe00a167653a1aaee01d93e77e730e")
+ ("aaaaaaaaa" . "552e6a97297c53e592208cf97fbb3b60")
+ ("aaaaaaaaaa" . "e09c80c42fda55f9d992e59ca6b3307d")
+ ("aaaaaaaaaaa" . "d57f21e6a273781dbf8b7657940f3b03")
+ ("aaaaaaaaaaaa" . "45e4812014d83dde5666ebdf5a8ed1ed")
+ ("aaaaaaaaaaaaa" . "c162de19c4c3731ca3428769d0cd593d")
+ ("aaaaaaaaaaaaaa" . "451599a5f9afa91a0f2097040a796f3d")
+ ("aaaaaaaaaaaaaaa" . "12f9cf6998d52dbe773b06f848bb3608")
+ ("aaaaaaaaaaaaaaaa" . "23ca472302f49b3ea5592b146a312da0")
+ ("aaaaaaaaaaaaaaaaa" . "88e42e96cc71151b6e1938a1699b0a27")
+ ("aaaaaaaaaaaaaaaaaa" . "2c60c24e7087e18e45055a33f9a5be91")
+ ("aaaaaaaaaaaaaaaaaaa" . "639d76897485360b3147e66e0a8a3d6c")
+ ("aaaaaaaaaaaaaaaaaaaa" . "22d42eb002cefa81e9ad604ea57bc01d")
+ ("aaaaaaaaaaaaaaaaaaaaa" . "bd049f221af82804c5a2826809337c9b")
+ ("aaaaaaaaaaaaaaaaaaaaaa" . "ff49cfac3968dbce26ebe7d4823e58bd")
+ ("aaaaaaaaaaaaaaaaaaaaaaa" . "d95dbfee231e34cccb8c04444412ed7d")
+ ("aaaaaaaaaaaaaaaaaaaaaaaa" . "40edae4bad0e5bf6d6c2dc5615a86afb")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaa" . "a5a8bfa3962f49330227955e24a2e67c")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaa" . "ae791f19bdf77357ff10bb6b0e97e121")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaa" . "aaab9c59a88bf0bdfcb170546c5459d6")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "b0f0545856af1a340acdedce23c54b97")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "f7ce3d7d44f3342107d884bfa90c966a")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "59e794d45697b360e18ba972bada0123")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "3b0845db57c200be6052466f87b2198a")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "5eca9bd3eb07c006cd43ae48dfde7fd3")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "b4f13cb081e412f44e99742cb128a1a5")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" . "4c660346451b8cf91ef50f4634458d41")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "11db24dc3f6c2145701db08625dd6d76")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "80dad3aad8584778352c68ab06250327")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "1227fe415e79db47285cb2689c93963f")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "8e084f489f1bdf08c39f98ff6447ce6d")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "08b2f2b0864bac1ba1585043362cbec9")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "4697843037d962f62a5a429e611e0f5f")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "10c4da18575c092b486f8ab96c01c02f")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "af205d729450b663f48b11d839a1c8df")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "0d3f91798fac6ee279ec2485b25f1124")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "4c3c7c067634daec9716a80ea886d123")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "d1e358e6e3b707282cdd06e919f7e08c")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "8c6ded4f0af86e0a7e301f8a716c4363")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "4c2d8bcb02d982d7cb77f649c0a2dea8")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "bdb662f765cd310f2a547cab1cfecef6")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "08ff5f7301d30200ab89169f6afdb7af")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "6eb6a030bcce166534b95bc2ab45d9cf")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "1bb77918e5695c944be02c16ae29b25e")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "b6fe77c19f0f0f4946c761d62585bfea")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "e9e7e260dce84ffa6e0e7eb5fd9d37fc")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "eced9e0b81ef2bba605cbc5e2e76a1d0")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "ef1772b6dff9a122358552954ad0df65")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "3b0c8ac703f828b04c6c197006d17218")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "652b906d60af96844ebd21b674f35e93")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "dc2f2f2462a0d72358b2f99389458606")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "762fc2665994b217c52c3c2eb7d9f406")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "cc7ed669cf88f201c3297c6a91e1d18d")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "cced11f7bbbffea2f718903216643648")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "24612f0ce2c9d2cf2b022ef1e027a54f")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "b06521f39153d618550606be297466d5")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "014842d480b571495a4a0363793f7367")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "c743a45e0d2e6a95cb859adae0248435")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "def5d97e01e1219fb2fc8da6c4d6ba2f")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "92cb737f8687ccb93022fdb411a77cca")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "a0d1395c7fb36247bfe2d49376d9d133")
+ ("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa" .
+ "ab75504250558b788f99d1ebd219abf2"))
+ "AList of test input strings and stringified message-digests
+according to my additional test suite")
+
+#+md5-testing
+(defun test-with-testsuite (testsuite)
(loop for count from 1
- for (source . md5-string) in +rfc1321-testsuite+
- for md5-digest = (md5sum-sequence source)
- for md5-result-string = (format nil "~(~{~2,'0X~}~)"
- (map 'list #'identity md5-digest))
- do
- (format
- *trace-output*
- "~2&Test-Case ~D:~% Input: ~S~% Required: ~A~% Returned: ~A~%"
- count source md5-string md5-result-string)
- when (string= md5-string md5-result-string)
- do (format *trace-output* " OK~%")
- else
- count 1 into failed
- and do (format *trace-output* " FAILED~%")
- finally
- (format *trace-output*
- "~2&~[All ~D test cases succeeded~:;~:*~D of ~D test cases failed~].~%"
- failed (1- count))
- (return (zerop failed))))
+ for (source . md5-string) in testsuite
+ for md5-digest = (md5sum-sequence source)
+ for md5-result-string = (format nil "~(~{~2,'0X~}~)"
+ (map 'list #'identity md5-digest))
+ do
+ (format
+ *trace-output*
+ "~2&Test-Case ~D:~% Input: ~S~% Required: ~A~% Returned: ~A~%"
+ count source md5-string md5-result-string)
+ when (string= md5-string md5-result-string)
+ do (format *trace-output* " OK~%")
+ else
+ count 1 into failed
+ and do (format *trace-output* " FAILED~%")
+ finally
+ (format *trace-output*
+ "~2&~[All ~D test cases succeeded~:;~:*~D of ~D test cases failed~].~%"
+ failed (1- count))
+ (return (zerop failed))))
+
+#+md5-testing
+(defun test-rfc1321 ()
+ (test-with-testsuite +rfc1321-testsuite+))
+
+#+md5-testing
+(defun test-other ()
+ (test-with-testsuite +other-testsuite+))
#+cmu
(eval-when (:compile-toplevel :execute)