+;;;; This file implements The MD5 Message-Digest Algorithm, as defined in
+;;;; RFC 1321 by R. Rivest, published April 1992.
+;;;;
+;;;; It was written by Pierre R. Mai, with copious input from the
+;;;; cmucl-help mailing-list hosted at cons.org, in November 2001 and
+;;;; has been placed into the public domain.
+;;;;
+;;;; $Id: md5.lisp,v 1.1 2002/11/11 11:11:22 kevin Exp $
+;;;;
+;;;; While the implementation should work on all conforming Common
+;;;; Lisp implementations, it has only been optimized for CMU CL,
+;;;; where it achieved comparable performance to the standard md5sum
+;;;; utility (within a factor of 1.5 or less on iA32 and UltraSparc
+;;;; hardware).
+;;;;
+;;;; Since the implementation makes heavy use of arithmetic on
+;;;; (unsigned-byte 32) numbers, acceptable performance is likely only
+;;;; on CL implementations that support unboxed arithmetic on such
+;;;; numbers in some form. For other CL implementations a 16bit
+;;;; implementation of MD5 is probably more suitable.
+;;;;
+;;;; The code implements correct operation for files of unbounded size
+;;;; as is, at the cost of having to do a single generic integer
+;;;; addition for each call to update-md5-state. If you call
+;;;; update-md5-state frequently with little data, this can pose a
+;;;; performance problem. If you can live with a size restriction of
+;;;; 512 MB, then you can enable fast fixnum arithmetic by putting
+;;;; :md5-small-length onto *features* prior to compiling this file.
+;;;;
+;;;; Testing code can be compiled by including :md5-testing on
+;;;; *features* prior to compilation. In that case evaluating
+;;;; (md5::test-rfc1321) will run all the test-cases present in
+;;;; Appendix A.5 of RFC 1321 and report on the results.
+;;;;
+;;;; This software is "as is", and has no warranty of any kind. The
+;;;; authors assume no responsibility for the consequences of any use
+;;;; of this software.
+
+(defpackage #:md5 (:use #:cl)
+ (:export
+ ;; Low-Level types and functions
+ #:md5-regs #:initial-md5-regs #:md5regs-digest
+ #:update-md5-block #:fill-block #:fill-block-ub8 #:fill-block-char
+ ;; Mid-Level types and functions
+ #:md5-state #:md5-state-p #:make-md5-state
+ #:update-md5-state #:finalize-md5-state
+ ;; High-Level functions on sequences, streams and files
+ #:md5sum-sequence #:md5sum-stream #:md5sum-file))
+
+(in-package #:md5)
+
+#+cmu
+(eval-when (:compile-toplevel)
+ (defparameter *old-expansion-limit* ext:*inline-expansion-limit*)
+ (setq ext:*inline-expansion-limit* (max ext:*inline-expansion-limit* 1000)))
+
+#+cmu
+(eval-when (:compile-toplevel :execute)
+ (defparameter *old-features* *features*)
+ (pushnew (c:backend-byte-order c:*target-backend*) *features*))
+
+;;; Section 2: Basic Datatypes
+
+(deftype ub32 ()
+ "Corresponds to the 32bit quantity word of the MD5 Spec"
+ `(unsigned-byte 32))
+
+(defmacro assemble-ub32 (a b c d)
+ "Assemble an ub32 value from the given (unsigned-byte 8) values,
+where a is the intended low-order byte and d the high-order byte."
+ `(the ub32 (logior (ash ,d 24) (ash ,c 16) (ash ,b 8) ,a)))
+
+;;; Section 3.4: Auxilliary functions
+
+(declaim (inline f g h i)
+ (ftype (function (ub32 ub32 ub32) ub32) f g h i))
+
+(defun f (x y z)
+ (declare (type ub32 x y z)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ #+cmu
+ (kernel:32bit-logical-or (kernel:32bit-logical-and x y)
+ (kernel:32bit-logical-andc1 x z))
+ #-cmu
+ (logior (logand x y) (logandc1 x z)))
+
+(defun g (x y z)
+ (declare (type ub32 x y z)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ #+cmu
+ (kernel:32bit-logical-or (kernel:32bit-logical-and x z)
+ (kernel:32bit-logical-andc2 y z))
+ #-cmu
+ (logior (logand x z) (logandc2 y z)))
+
+(defun h (x y z)
+ (declare (type ub32 x y z)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ #+cmu
+ (kernel:32bit-logical-xor x (kernel:32bit-logical-xor y z))
+ #-cmu
+ (logxor x y z))
+
+(defun i (x y z)
+ (declare (type ub32 x y z)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ #+cmu
+ (kernel:32bit-logical-xor y (kernel:32bit-logical-orc2 x z))
+ #-cmu
+ (logxor y (logorc2 x z)))
+
+(declaim (inline mod32+)
+ (ftype (function (ub32 ub32) ub32) mod32+))
+(defun mod32+ (a b)
+ (declare (type ub32 a b) (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (ldb (byte 32 0) (+ a b)))
+
+#+cmu
+(define-compiler-macro mod32+ (a b)
+ `(ext:truly-the ub32 (+ ,a ,b)))
+
+(declaim (inline rol32)
+ (ftype (function (ub32 (unsigned-byte 5)) ub32) rol32))
+(defun rol32 (a s)
+ (declare (type ub32 a) (type (unsigned-byte 5) s)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ #+cmu
+ (kernel:32bit-logical-or #+little-endian (kernel:shift-towards-end a s)
+ #+big-endian (kernel:shift-towards-start a s)
+ (ash a (- s 32)))
+ #-cmu
+ (logior (ldb (byte 32 0) (ash a s)) (ash a (- s 32))))
+
+;;; Section 3.4: Table T
+
+(eval-when (:compile-toplevel :load-toplevel :execute)
+ (defparameter *t* (make-array 64 :element-type 'ub32
+ :initial-contents
+ (loop for i from 1 to 64
+ collect
+ (truncate
+ (* 4294967296
+ (abs (sin (float i 0.0d0)))))))))
+
+;;; Section 3.4: Helper Macro for single round definitions
+
+(defmacro with-md5-round ((op block) &rest clauses)
+ (loop for (a b c d k s i) in clauses
+ collect
+ `(setq ,a (mod32+ ,b (rol32 (mod32+ (mod32+ ,a (,op ,b ,c ,d))
+ (mod32+ (aref ,block ,k)
+ ,(aref *t* (1- i))))
+ ,s)))
+ into result
+ finally
+ (return `(progn ,@result))))
+
+;;; Section 3.3: (Initial) MD5 Working Set
+
+(deftype md5-regs ()
+ "The working state of the MD5 algorithm, which contains the 4 32-bit
+registers A, B, C and D."
+ `(simple-array (unsigned-byte 32) (4)))
+
+(defmacro md5-regs-a (regs)
+ `(aref ,regs 0))
+
+(defmacro md5-regs-b (regs)
+ `(aref ,regs 1))
+
+(defmacro md5-regs-c (regs)
+ `(aref ,regs 2))
+
+(defmacro md5-regs-d (regs)
+ `(aref ,regs 3))
+
+(defconstant +md5-magic-a+ (assemble-ub32 #x01 #x23 #x45 #x67)
+ "Initial value of Register A of the MD5 working state.")
+(defconstant +md5-magic-b+ (assemble-ub32 #x89 #xab #xcd #xef)
+ "Initial value of Register B of the MD5 working state.")
+(defconstant +md5-magic-c+ (assemble-ub32 #xfe #xdc #xba #x98)
+ "Initial value of Register C of the MD5 working state.")
+(defconstant +md5-magic-d+ (assemble-ub32 #x76 #x54 #x32 #x10)
+ "Initial value of Register D of the MD5 working state.")
+
+(declaim (inline initial-md5-regs))
+(defun initial-md5-regs ()
+ "Create the initial working state of an MD5 run."
+ (declare (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (let ((regs (make-array 4 :element-type '(unsigned-byte 32))))
+ (declare (type md5-regs regs))
+ (setf (md5-regs-a regs) +md5-magic-a+
+ (md5-regs-b regs) +md5-magic-b+
+ (md5-regs-c regs) +md5-magic-c+
+ (md5-regs-d regs) +md5-magic-d+)
+ regs))
+
+;;; Section 3.4: Operation on 16-Word Blocks
+
+(defun update-md5-block (regs block)
+ "This is the core part of the MD5 algorithm. It takes a complete 16
+word block of input, and updates the working state in A, B, C, and D
+accordingly."
+ (declare (type md5-regs regs)
+ (type (simple-array ub32 (16)) block)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (let ((a (md5-regs-a regs)) (b (md5-regs-b regs))
+ (c (md5-regs-c regs)) (d (md5-regs-d regs)))
+ (declare (type ub32 a b c d))
+ ;; Round 1
+ (with-md5-round (f block)
+ (A B C D 0 7 1)(D A B C 1 12 2)(C D A B 2 17 3)(B C D A 3 22 4)
+ (A B C D 4 7 5)(D A B C 5 12 6)(C D A B 6 17 7)(B C D A 7 22 8)
+ (A B C D 8 7 9)(D A B C 9 12 10)(C D A B 10 17 11)(B C D A 11 22 12)
+ (A B C D 12 7 13)(D A B C 13 12 14)(C D A B 14 17 15)(B C D A 15 22 16))
+ ;; Round 2
+ (with-md5-round (g block)
+ (A B C D 1 5 17)(D A B C 6 9 18)(C D A B 11 14 19)(B C D A 0 20 20)
+ (A B C D 5 5 21)(D A B C 10 9 22)(C D A B 15 14 23)(B C D A 4 20 24)
+ (A B C D 9 5 25)(D A B C 14 9 26)(C D A B 3 14 27)(B C D A 8 20 28)
+ (A B C D 13 5 29)(D A B C 2 9 30)(C D A B 7 14 31)(B C D A 12 20 32))
+ ;; Round 3
+ (with-md5-round (h block)
+ (A B C D 5 4 33)(D A B C 8 11 34)(C D A B 11 16 35)(B C D A 14 23 36)
+ (A B C D 1 4 37)(D A B C 4 11 38)(C D A B 7 16 39)(B C D A 10 23 40)
+ (A B C D 13 4 41)(D A B C 0 11 42)(C D A B 3 16 43)(B C D A 6 23 44)
+ (A B C D 9 4 45)(D A B C 12 11 46)(C D A B 15 16 47)(B C D A 2 23 48))
+ ;; Round 4
+ (with-md5-round (i block)
+ (A B C D 0 6 49)(D A B C 7 10 50)(C D A B 14 15 51)(B C D A 5 21 52)
+ (A B C D 12 6 53)(D A B C 3 10 54)(C D A B 10 15 55)(B C D A 1 21 56)
+ (A B C D 8 6 57)(D A B C 15 10 58)(C D A B 6 15 59)(B C D A 13 21 60)
+ (A B C D 4 6 61)(D A B C 11 10 62)(C D A B 2 15 63)(B C D A 9 21 64))
+ ;; Update and return
+ (setf (md5-regs-a regs) (mod32+ (md5-regs-a regs) a)
+ (md5-regs-b regs) (mod32+ (md5-regs-b regs) b)
+ (md5-regs-c regs) (mod32+ (md5-regs-c regs) c)
+ (md5-regs-d regs) (mod32+ (md5-regs-d regs) d))
+ regs))
+
+;;; Section 3.4: Converting 8bit-vectors into 16-Word Blocks
+
+(declaim (inline fill-block fill-block-ub8 fill-block-char))
+(defun fill-block (block buffer offset)
+ "Convert a complete 64 byte input vector segment into the given 16
+word MD5 block. This currently works on (unsigned-byte 8) and
+character simple-arrays, via the functions `fill-block-ub8' and
+`fill-block-char' respectively."
+ (declare (type (integer 0 #.(- most-positive-fixnum 64)) offset)
+ (type (simple-array ub32 (16)) block)
+ (type (simple-array * (*)) buffer)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ (etypecase buffer
+ ((simple-array (unsigned-byte 8) (*))
+ (fill-block-ub8 block buffer offset))
+ (simple-string
+ (fill-block-char block buffer offset))))
+
+(defun fill-block-ub8 (block buffer offset)
+ "Convert a complete 64 (unsigned-byte 8) input vector segment
+starting from offset into the given 16 word MD5 block."
+ (declare (type (integer 0 #.(- most-positive-fixnum 64)) offset)
+ (type (simple-array ub32 (16)) block)
+ (type (simple-array (unsigned-byte 8) (*)) buffer)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ #+(and :cmu :little-endian)
+ (kernel:bit-bash-copy
+ buffer (+ (* vm:vector-data-offset vm:word-bits) (* offset vm:byte-bits))
+ block (* vm:vector-data-offset vm:word-bits)
+ (* 64 vm:byte-bits))
+ #-(and :cmu :little-endian)
+ (loop for i of-type (integer 0 16) from 0
+ for j of-type (integer 0 #.most-positive-fixnum)
+ from offset to (+ offset 63) by 4
+ do
+ (setf (aref block i)
+ (assemble-ub32 (aref buffer j)
+ (aref buffer (+ j 1))
+ (aref buffer (+ j 2))
+ (aref buffer (+ j 3))))))
+
+(defun fill-block-char (block buffer offset)
+ "Convert a complete 64 character input string segment starting from
+offset into the given 16 word MD5 block."
+ (declare (type (integer 0 #.(- most-positive-fixnum 64)) offset)
+ (type (simple-array ub32 (16)) block)
+ (type simple-string buffer)
+ (optimize (speed 3) (safety 0) (space 0) (debug 0)))
+ #+(and :cmu :little-endian)
+ (kernel:bit-bash-copy
+ buffer (+ (* vm:vector-data-offset vm:word-bits) (* offset vm:byte-bits))
+ block (* vm:vector-data-offset vm:word-bits)
+ (* 64 vm:byte-bits))
+ #-(and :cmu :little-endian)
+ (loop for i of-type (integer 0 16) from 0
+ for j of-type (integer 0 #.most-positive-fixnum)
+ from offset to (+ offset 63) by 4
+ do
+ (setf (aref block i)
+ (assemble-ub32 (char-code (schar buffer j))
+ (char-code (schar buffer (+ j 1)))
+ (char-code (schar buffer (+ j 2)))
+ (char-code (schar buffer (+ j 3)))))))
+
+;;; Section 3.5: Message Digest Output
+
+(declaim (inline md5regs-digest))
+(defun md5regs-digest (regs)
+ "Create the final 16 byte message-digest from the MD5 working state
+in regs. Returns a (simple-array (unsigned-byte 8) (16))."
+ (declare (optimize (speed 3) (safety 0) (space 0) (debug 0))
+ (type md5-regs regs))
+ (let ((result (make-array 16 :element-type '(unsigned-byte 8))))
+ (declare (type (simple-array (unsigned-byte 8) (16)) result))
+ (macrolet ((frob (reg offset)
+ (let ((var (gensym)))
+ `(let ((,var ,reg))
+ (declare (type ub32 ,var))
+ (setf
+ (aref result ,offset) (ldb (byte 8 0) ,var)
+ (aref result ,(+ offset 1)) (ldb (byte 8 8) ,var)
+ (aref result ,(+ offset 2)) (ldb (byte 8 16) ,var)
+ (aref result ,(+ offset 3)) (ldb (byte 8 24) ,var))))))
+ (frob (md5-regs-a regs) 0)
+ (frob (md5-regs-b regs) 4)
+ (frob (md5-regs-c regs) 8)
+ (frob (md5-regs-d regs) 12))
+ result))
+
+;;; Mid-Level Drivers
+
+(defstruct (md5-state
+ (:constructor make-md5-state ())
+ (:copier))
+ (regs (initial-md5-regs) :type md5-regs :read-only t)
+ (amount 0 :type
+ #-md5-small-length (integer 0 *)
+ #+md5-small-length (unsigned-byte 29))
+ (block (make-array 16 :element-type '(unsigned-byte 32)) :read-only t
+ :type (simple-array (unsigned-byte 32) (16)))
+ (buffer (make-array 64 :element-type '(unsigned-byte 8)) :read-only t
+ :type (simple-array (unsigned-byte 8) (64)))
+ (buffer-index 0 :type (integer 0 63))
+ (finalized-p nil))
+
+(declaim (inline copy-to-buffer))
+(defun copy-to-buffer (from from-offset count buffer buffer-offset)
+ "Copy a partial segment from input vector from starting at
+from-offset and copying count elements into the 64 byte buffer
+starting at buffer-offset."
+ (declare (optimize (speed 3) (safety 0) (space 0) (debug 0))
+ (type (unsigned-byte 29) from-offset)
+ (type (integer 0 63) count buffer-offset)
+ (type (simple-array * (*)) from)
+ (type (simple-array (unsigned-byte 8) (64)) buffer))
+ #+cmu
+ (kernel:bit-bash-copy
+ from (+ (* vm:vector-data-offset vm:word-bits) (* from-offset vm:byte-bits))
+ buffer (+ (* vm:vector-data-offset vm:word-bits)
+ (* buffer-offset vm:byte-bits))
+ (* count vm:byte-bits))
+ #-cmu
+ (etypecase from
+ (simple-string
+ (loop for buffer-index of-type (integer 0 64) from buffer-offset
+ for from-index of-type fixnum from from-offset
+ below (+ from-offset count)
+ do
+ (setf (aref buffer buffer-index)
+ (char-code (schar (the simple-string from) from-index)))))
+ ((simple-array (unsigned-byte 8) (*))
+ (loop for buffer-index of-type (integer 0 64) from buffer-offset
+ for from-index of-type fixnum from from-offset
+ below (+ from-offset count)
+ do
+ (setf (aref buffer buffer-index)
+ (aref (the (simple-array (unsigned-byte 8) (*)) from)
+ from-index))))))
+
+(defun update-md5-state (state sequence &key (start 0) (end (length sequence)))
+ "Update the given md5-state from sequence, which is either a
+simple-string or a simple-array with element-type (unsigned-byte 8),
+bounded by start and end, which must be numeric bounding-indices."
+ (declare (type md5-state state)
+ (type (simple-array * (*)) sequence)
+ (type fixnum start end)
+ (optimize (speed 3) #+cmu (safety 0) (space 0) (debug 0))
+ #+cmu
+ (ext:optimize-interface (safety 1) (debug 1)))
+ (let ((regs (md5-state-regs state))
+ (block (md5-state-block state))
+ (buffer (md5-state-buffer state))
+ (buffer-index (md5-state-buffer-index state))
+ (length (- end start)))
+ (declare (type md5-regs regs) (type fixnum length)
+ (type (integer 0 63) buffer-index)
+ (type (simple-array (unsigned-byte 32) (16)) block)
+ (type (simple-array (unsigned-byte 8) (64)) buffer))
+ ;; Handle old rest
+ (unless (zerop buffer-index)
+ (let ((amount (min (- 64 buffer-index) length)))
+ (declare (type (integer 0 63) amount))
+ (copy-to-buffer sequence start amount buffer buffer-index)
+ (setq start (the fixnum (+ start amount)))
+ (when (>= start end)
+ (setf (md5-state-buffer-index state) (+ buffer-index amount))
+ (return-from update-md5-state state)))
+ (fill-block-ub8 block buffer 0)
+ (update-md5-block regs block))
+ ;; Handle main-part and new-rest
+ (etypecase sequence
+ ((simple-array (unsigned-byte 8) (*))
+ (locally
+ (declare (type (simple-array (unsigned-byte 8) (*)) sequence))
+ (loop for offset of-type (unsigned-byte 29) from start below end by 64
+ until (< (- end offset) 64)
+ do
+ (fill-block-ub8 block sequence offset)
+ (update-md5-block regs block)
+ finally
+ (let ((amount (- end offset)))
+ (unless (zerop amount)
+ (copy-to-buffer sequence offset amount buffer 0))
+ (setf (md5-state-buffer-index state) amount)))))
+ (simple-string
+ (locally
+ (declare (type simple-string sequence))
+ (loop for offset of-type (unsigned-byte 29) from start below end by 64
+ until (< (- end offset) 64)
+ do
+ (fill-block-char block sequence offset)
+ (update-md5-block regs block)
+ finally
+ (let ((amount (- end offset)))
+ (unless (zerop amount)
+ (copy-to-buffer sequence offset amount buffer 0))
+ (setf (md5-state-buffer-index state) amount))))))
+ (setf (md5-state-amount state)
+ #-md5-small-length (+ (md5-state-amount state) length)
+ #+md5-small-length (the (unsigned-byte 29)
+ (+ (md5-state-amount state) length)))
+ state))
+
+(defun finalize-md5-state (state)
+ "If the given md5-state has not already been finalized, finalize it,
+by processing any remaining input in its buffer, with suitable padding
+and appended bit-length, as specified by the MD5 standard.
+
+The resulting MD5 message-digest is returned as an array of sixteen
+(unsigned-byte 8) values. Calling `update-md5-state' after a call to
+`finalize-md5-state' results in unspecified behaviour."
+ (declare (type md5-state state)
+ (optimize (speed 3) #+cmu (safety 0) (space 0) (debug 0))
+ #+cmu
+ (ext:optimize-interface (safety 1) (debug 1)))
+ (or (md5-state-finalized-p state)
+ (let ((regs (md5-state-regs state))
+ (block (md5-state-block state))
+ (buffer (md5-state-buffer state))
+ (buffer-index (md5-state-buffer-index state))
+ (total-length (* 8 (md5-state-amount state))))
+ (declare (type md5-regs regs)
+ (type (integer 0 63) buffer-index)
+ (type (simple-array ub32 (16)) block)
+ (type (simple-array (unsigned-byte 8) (*)) buffer))
+ (setf (aref buffer buffer-index) #x80)
+ (loop for index of-type (integer 0 64)
+ from (1+ buffer-index) below 64
+ do (setf (aref buffer index) #x00))
+ (fill-block-ub8 block buffer 0)
+ (when (< buffer-index 56)
+ (setf (aref block 14) (ldb (byte 32 0) total-length))
+ #-md5-small-length
+ (setf (aref block 15) (ldb (byte 32 32) total-length)))
+ (update-md5-block regs block)
+ (when (< 56 buffer-index 64)
+ (loop for index of-type (integer 0 16) from 0 below 16
+ do (setf (aref block index) #x00000000))
+ (setf (aref block 14) (ldb (byte 32 0) total-length))
+ #-md5-small-length
+ (setf (aref block 15) (ldb (byte 32 32) total-length))
+ (update-md5-block regs block))
+ (setf (md5-state-finalized-p state)
+ (md5regs-digest regs)))))
+
+;;; High-Level Drivers
+
+(defun md5sum-sequence (sequence &key (start 0) end)
+ "Calculate the MD5 message-digest of data in sequence. On CMU CL
+this works for all sequences whose element-type is supported by the
+underlying MD5 routines, on other implementations it only works for 1d
+simple-arrays with such element types."
+ (declare (optimize (speed 3) (space 0) (debug 0))
+ (type vector sequence) (type fixnum start))
+ (let ((state (make-md5-state)))
+ (declare (type md5-state state))
+ #+cmu
+ (lisp::with-array-data ((data sequence) (real-start start) (real-end end))
+ (update-md5-state state data :start real-start :end real-end))
+ #-cmu
+ (let ((real-end (or end (length sequence))))
+ (declare (type fixnum real-end))
+ (update-md5-state state sequence :start start :end real-end))
+ (finalize-md5-state state)))
+
+(defconstant +buffer-size+ (* 128 1024)
+ "Size of internal buffer to use for md5sum-stream and md5sum-file
+operations. This should be a multiple of 64, the MD5 block size.")
+
+(deftype buffer-index () `(integer 0 ,+buffer-size+))
+
+(defun md5sum-stream (stream)
+ "Calculate an MD5 message-digest of the contents of stream. Its
+element-type has to be either (unsigned-byte 8) or character."
+ (declare (optimize (speed 3) (space 0) (debug 0)))
+ (let ((state (make-md5-state)))
+ (declare (type md5-state state))
+ (cond
+ ((equal (stream-element-type stream) '(unsigned-byte 8))
+ (let ((buffer (make-array +buffer-size+
+ :element-type '(unsigned-byte 8))))
+ (declare (type (simple-array (unsigned-byte 8) (#.+buffer-size+))
+ buffer))
+ (loop for bytes of-type buffer-index = (read-sequence buffer stream)
+ do (update-md5-state state buffer :end bytes)
+ until (< bytes +buffer-size+)
+ finally
+ (return (finalize-md5-state state)))))
+ ((equal (stream-element-type stream) 'character)
+ (let ((buffer (make-string +buffer-size+)))
+ (declare (type (simple-string #.+buffer-size+) buffer))
+ (loop for bytes of-type buffer-index = (read-sequence buffer stream)
+ do (update-md5-state state buffer :end bytes)
+ until (< bytes +buffer-size+)
+ finally
+ (return (finalize-md5-state state)))))
+ (t
+ (error "Unsupported stream element-type ~S for stream ~S."
+ (stream-element-type stream) stream)))))
+
+(defun md5sum-file (pathname)
+ "Calculate the MD5 message-digest of the file specified by pathname."
+ (declare (optimize (speed 3) (space 0) (debug 0)))
+ (with-open-file (stream pathname :element-type '(unsigned-byte 8))
+ (md5sum-stream stream)))
+
+#+md5-testing
+(defconstant +rfc1321-testsuite+
+ '(("" . "d41d8cd98f00b204e9800998ecf8427e")
+ ("a" ."0cc175b9c0f1b6a831c399e269772661")
+ ("abc" . "900150983cd24fb0d6963f7d28e17f72")
+ ("message digest" . "f96b697d7cb7938d525a2f31aaf161d0")
+ ("abcdefghijklmnopqrstuvwxyz" . "c3fcd3d76192e4007dfb496cca67e13b")
+ ("ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789" .
+ "d174ab98d277d9f5a5611c2c9f419d9f")
+ ("12345678901234567890123456789012345678901234567890123456789012345678901234567890" .
+ "57edf4a22be3c955ac49da2e2107b67a"))
+ "AList of test input strings and stringified message-digests
+according to the test suite in Appendix A.5 of RFC 1321")
+
+#+md5-testing
+(defun test-rfc1321 ()
+ (loop for count from 1
+ for (source . md5-string) in +rfc1321-testsuite+
+ for md5-digest = (md5sum-sequence source)
+ for md5-result-string = (format nil "~(~{~2,'0X~}~)"
+ (map 'list #'identity md5-digest))
+ do
+ (format
+ *trace-output*
+ "~2&Test-Case ~D:~% Input: ~S~% Required: ~A~% Returned: ~A~%"
+ count source md5-string md5-result-string)
+ when (string= md5-string md5-result-string)
+ do (format *trace-output* " OK~%")
+ else
+ count 1 into failed
+ and do (format *trace-output* " FAILED~%")
+ finally
+ (format *trace-output*
+ "~2&~[All ~D test cases succeeded~:;~:*~D of ~D test cases failed~].~%"
+ failed (1- count))
+ (return (zerop failed))))
+
+#+cmu
+(eval-when (:compile-toplevel :execute)
+ (setq *features* *old-features*))
+
+#+cmu
+(eval-when (:compile-toplevel)
+ (setq ext:*inline-expansion-limit* *old-expansion-limit*))
projects / md5.git / commitdiff