--- /dev/null
+compile:
+ g++ -O2 -I. wdq2wav.cpp -o wdq2wav
+
+install: compile
+ install -m 0755 -u root -g root wdq2wav $(DESTDIR)/usr/bin
+ install -m 0644 -u root -g root wdq2wav.1 $(DESTDIR)/usr/share/man/man1
+
--- /dev/null
+wdq2wav for Debian
+------------------
+
+<possible notes regarding this package - if none, delete this file>
+
+ -- Kevin M. Rosenberg <kmr@debian.org>, Mon, 20 Jan 2003 18:59:50 -0700
--- /dev/null
+wdq2wav (1.0-1) unstable; urgency=low
+
+ * Initial Release.
+
+ -- Kevin M. Rosenberg <kmr@debian.org> Mon, 20 Jan 2003 18:59:50 -0700
+
--- /dev/null
+Source: wdq2wav
+Section: contrib/utils
+Priority: extra
+Maintainer: Kevin M. Rosenberg <kmr@debian.org>
+Build-Depends: debhelper (>> 4.0.0)
+Standards-Version: 3.5.8
+
+Package: wdq2wav
+Architecture: any
+Depends: ${shlibs:Depends}
+Description: Converts a WinDAQ channel to sound .wav file
+ This program extracts a channel from a WinDAQ file and produces
+ a .wav file that can be played. This is helpful when recording a
+ chatter channel for a WinDAQ session with multiple A/D channels.
--- /dev/null
+This package was debianized by Kevin M. Rosenberg <kmr@debian.org> on
+Mon, 20 Jan 2003 18:59:50 -0700.
+
+It was downloaded from ftp://wdq2wav.b9.com/
+
+Upstream Authors: Kevin M. Rosenberg <kevin@rosenberg.net>
+
+Copyright:
+
+Copyright (C) 2003 by Kevin M. Rosenberg
+
+This program is licensed under the GNU General Public License. A
+copy of this license is in your Debian file system as
+/usr/share/common-licenses/GPL.
+
--- /dev/null
+usr/bin
+usr/share/man/man1
+
--- /dev/null
+#! /bin/sh
+# postinst script for wdq2wav
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+# * <postinst> `configure' <most-recently-configured-version>
+# * <old-postinst> `abort-upgrade' <new version>
+# * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+# <new-version>
+# * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+# <failed-install-package> <version> `removing'
+# <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+#
+# quoting from the policy:
+# Any necessary prompting should almost always be confined to the
+# post-installation script, and should be protected with a conditional
+# so that unnecessary prompting doesn't happen if a package's
+# installation fails and the `postinst' is called with `abort-upgrade',
+# `abort-remove' or `abort-deconfigure'.
+
+case "$1" in
+ configure)
+
+ ;;
+
+ abort-upgrade|abort-remove|abort-deconfigure)
+
+ ;;
+
+ *)
+ echo "postinst called with unknown argument \`$1'" >&2
+ exit 1
+ ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
--- /dev/null
+#! /bin/sh
+# postrm script for wdq2wav
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+# * <postrm> `remove'
+# * <postrm> `purge'
+# * <old-postrm> `upgrade' <new-version>
+# * <new-postrm> `failed-upgrade' <old-version>
+# * <new-postrm> `abort-install'
+# * <new-postrm> `abort-install' <old-version>
+# * <new-postrm> `abort-upgrade' <old-version>
+# * <disappearer's-postrm> `disappear' <r>overwrit>r> <new-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+ purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+
+
+ ;;
+
+ *)
+ echo "postrm called with unknown argument \`$1'" >&2
+ exit 1
+
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+#! /bin/sh
+# preinst script for wdq2wav
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+# * <new-preinst> `install'
+# * <new-preinst> `install' <old-version>
+# * <new-preinst> `upgrade' <old-version>
+# * <old-preinst> `abort-upgrade' <new-version>
+#
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+ install|upgrade)
+# if [ "$1" = "upgrade" ]
+# then
+# start-stop-daemon --stop --quiet --oknodo \
+# --pidfile /var/run/wdq2wav.pid \
+# --exec /usr/sbin/wdq2wav 2>/dev/null || true
+# fi
+ ;;
+
+ abort-upgrade)
+ ;;
+
+ *)
+ echo "preinst called with unknown argument \`$1'" >&2
+ exit 1
+ ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
--- /dev/null
+#! /bin/sh
+# prerm script for wdq2wav
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+# * <prerm> `remove'
+# * <old-prerm> `upgrade' <new-version>
+# * <new-prerm> `failed-upgrade' <old-version>
+# * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
+# * <deconfigured's-prerm> `deconfigure' `in-favour'
+# <package-being-installed> <version> `removing'
+# <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+ remove|upgrade|deconfigure)
+# install-info --quiet --remove /usr/info/wdq2wav.info.gz
+ ;;
+ failed-upgrade)
+ ;;
+ *)
+ echo "prerm called with unknown argument \`$1'" >&2
+ exit 1
+ ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
--- /dev/null
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper.
+# GNU copyright 1997 to 1999 by Joey Hess.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# This is the debhelper compatibility version to use.
+export DH_COMPAT=4
+
+
+
+CFLAGS = -Wall -g
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -O0
+else
+ CFLAGS += -O2
+endif
+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+ INSTALL_PROGRAM += -s
+endif
+
+configure: configure-stamp
+configure-stamp:
+ dh_testdir
+ # Add here commands to configure the package.
+
+ touch configure-stamp
+
+
+build: build-stamp
+
+build-stamp: configure-stamp
+ dh_testdir
+
+ # Add here commands to compile the package.
+ $(MAKE)
+ #/usr/bin/docbook-to-man debian/wdq2wav.sgml > wdq2wav.1
+
+ touch build-stamp
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp configure-stamp
+
+ # Add here commands to clean up after the build process.
+ -$(MAKE) clean
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ # Add here commands to install the package into debian/wdq2wav.
+ $(MAKE) install DESTDIR=$(CURDIR)/debian/wdq2wav
+
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+ dh_testdir
+ dh_testroot
+# dh_installdebconf
+ dh_installdocs
+ dh_installexamples
+ dh_installmenu
+# dh_installlogrotate
+# dh_installemacsen
+# dh_installpam
+# dh_installmime
+# dh_installinit
+ dh_installcron
+ dh_installman
+ dh_installinfo
+# dh_undocumented
+ dh_installchangelogs
+ dh_link
+ dh_strip
+ dh_compress
+ dh_fixperms
+# dh_makeshlibs
+ dh_installdeb
+# dh_perl
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure