+This creates a projection file from a phantom. The options
+available when collecting projections are:
+
+\begin{twocollist}
+\twocolitem{\textbf{Geometry}}{
+ \begin{itemize}\itemsep=0pt
+ \item Parallel
+ \item Equiangular
+ \item Equilinear
+ \end{itemize}}
+\twocolitem{\textbf{Number of detectors}}{Sets the number of
+detectors in the detector array.}
+
+\twocolitem{\textbf{Number of views}}{Sets the number of views
+collected}
+
+\twocolitem{\textbf{Samples per detector}}{Sets the number of
+samples collected for each detector}
+
+\twocolitem{\textbf{View Ratio}}{Sets the field of view as a ratio
+of the diameter of the phantom. For normal scanning, a value of
+1.0 is fine.}
+
+\twocolitem{\textbf{Scan Ratio}}{Sets the length of scanning as a
+ratio of the view diameter. For normal scanning, a value of 1.0 is
+fine.}
+
+\twocolitem{\textbf{Focal length ratio}}{Sets the distance of the
+radiation source and detectors from the center of the object as a
+ratio of the radius of the object.
+
+For parallel geometries, a value of 1.0 is fine. For other
+geometries, this should be at least 2.0 to avoid artifacts.}
+\end{twocollist}
+
+\subsection{Advanced Options}
+\begin{twocollist}
+\twocolitem{\textbf{Rotation Angle}}{Sets the rotation amount as a
+multiple of pi. For parallel geometries use a rotation angle of 1
+and for equilinear and equiangular geometries use a rotation angle
+of 2. Using any other rotation angle will lead to artifacts.}
+\end{twocollist}
+
+