+++ /dev/null
-%
-% %%%%%%% %%%%% %%%%%% %%%%% % %
-% % % % % % % % % %
-% % % % % % % % % %
-% %%%%%%% %%%%% %%%%%% % % %
-% % % % % % % % %
-% % % % % % % % %
-% % %%%%%% %%%%%% %%%%% % %
-%
-% By Jean Orloff
-% Comments & suggestions by e-mail: ORLOFF@surya11.cern.ch
-% No modification of this file allowed if not e-sent to me.
-%
-% A simple way to measure the size of encapsulated postscript figures
-% from inside TeX, and to use it for automatically formatting texts
-% with inserted figures. Works both under Plain TeX-based macros
-% (Phyzzx, Harvmac, Psizzl, ...) and LaTeX environment.
-% Provides exactly the same result on any PostScript printer provided
-% the single instruction \psfor... is changed to fit the needs of the
-% particular dvi->ps translator used.
-% History:
-% 1.31: adds \psforDVIALW(?)
-% 1.30: adds \splitfile & \joinfiles for multi-file management
-% 1.24: fix error handling & add \psonlyboxes
-% 1.23: adds \putsp@ce for OzTeX fix
-% 1.22: makes \drawingBox \global for use in Phyzzx
-% 1.21: accepts %%BoundingBox: (atend)
-% 1.20: tries to add \psfordvitps for the TeXPS package.
-% 1.10: adds \psforoztex, error handling...
-%2345678 1 2345678 2 2345678 3 2345678 4 2345678 5 2345678 6 2345678 7 23456789
-%
-\def\temp{1.31}
-\let\tempp=\relax
-\expandafter\ifx\csname psboxversion\endcsname\relax
- \message{version: \temp}
-\else
- \ifdim\temp cm>\psboxversion cm
- \message{version: \temp}
- \else
- \message{psbox(\psboxversion) is already loaded: I won't load
- psbox(\temp)!}
- \let\temp=\psboxversion
- \let\tempp=\endinput
- \fi
-\fi
-\tempp
-\let\psboxversion=\temp
-\catcode`\@=11
-% Every macro likes a little privacy...
-%
-% Some common defs
-%
-\def\execute#1{#1}% NOT stupid: cs in #1 are then identified BEFORE execution
-\def\psm@keother#1{\catcode`#112\relax}% borrowed from latex
-\def\executeinspecs#1{%
-\execute{\begingroup\let\do\psm@keother\dospecials\catcode`\^^M=9#1\endgroup}}
-%
-%Trying to tame the variety of \special commands for Postscript: the
-% universal internal command \PSspeci@l##1##2 takes ##1 to be the
-% filename and ##2 to be the integer scale factor*1000 (as for usual
-% TeX \scale commands)
-%
-\def\psfortextures{% For TeXtures on the Macintosh
-%-----------------
-\def\PSspeci@l##1##2{%
-\special{illustration ##1\space scaled ##2}%
-}}
-%
-\def\psfordvitops{% For the DVItoPS converter on IBM mainframes
-%----------------
-\def\PSspeci@l##1##2{%
-\special{dvitops: import ##1\space \the\drawingwd \the\drawinght}%
-}}
-%
-\def\psfordvips{% For DVIPS converter on VAX, UNIX and PC's
-%--------------
-\def\PSspeci@l##1##2{%
-% \special{/@scaleunit 1000 def}% never read dox without trying!
-\d@my=0.1bp \d@mx=\drawingwd \divide\d@mx by\d@my%
-\special{PSfile=##1\space llx=\psllx\space lly=\pslly\space%
-urx=\psurx\space ury=\psury\space rwi=\number\d@mx}%
-}}
-%
-\def\psforoztex{% For the OzTeX shareware on the Macintosh
-%--------------
-\def\PSspeci@l##1##2{%
-\special{##1 \space
- ##2 1000 div dup scale
- \putsp@ce{\number-\psllx} \putsp@ce{\number-\pslly} translate
-}%
-}}
-\def\putsp@ce#1{#1 }
-%
-\def\psfordvitps{% From the UNIX TeXPS package, vers.>3.12
-%---------------
-% Convert a dimension into the number \psn@sp (in scaled points)
-\def\psdimt@n@sp##1{\d@mx=##1\relax\edef\psn@sp{\number\d@mx}}
-\def\PSspeci@l##1##2{%
-% psfig.psr contains the def of "startTexFig": if you can locate it
-% and include the correct pathname, it should work
-\special{dvitps: Include0 "psfig.psr"}% contains def of "startTexFig"
-\psdimt@n@sp{\drawingwd}
-\special{dvitps: Literal "\psn@sp\space"}
-\psdimt@n@sp{\drawinght}
-\special{dvitps: Literal "\psn@sp\space"}
-\psdimt@n@sp{\psllx bp}
-\special{dvitps: Literal "\psn@sp\space"}
-\psdimt@n@sp{\pslly bp}
-\special{dvitps: Literal "\psn@sp\space"}
-\psdimt@n@sp{\psurx bp}
-\special{dvitps: Literal "\psn@sp\space"}
-\psdimt@n@sp{\psury bp}
-\special{dvitps: Literal "\psn@sp\space startTexFig\space"}
-\special{dvitps: Include1 "##1"}
-\special{dvitps: Literal "endTexFig\space"}
-}}
-\def\psforDVIALW{% Try for dvialw, a UNIX public domain
-%---------------
-\def\PSspeci@l##1##2{
-\special{language "PS"
-literal "##2 1000 div dup scale"
-include "##1"}}}
-\def\psonlyboxes{% Draft-like behaviour if none of the others works
-%---------------
-\def\PSspeci@l##1##2{%
-\at(0cm;0cm){\boxit{\vbox to\drawinght
- {\vss
- \hbox to\drawingwd{\at(0cm;0cm){\hbox{(##1)}}\hss}
- }}}
-}%
-}
-%
-\def\psloc@lerr#1{%
-\let\savedPSspeci@l=\PSspeci@l%
-\def\PSspeci@l##1##2{%
-\at(0cm;0cm){\boxit{\vbox to\drawinght
- {\vss
- \hbox to\drawingwd{\at(0cm;0cm){\hbox{(##1) #1}}\hss}
- }}}
-\let\PSspeci@l=\savedPSspeci@l% restore normal output for other figs!
-}%
-}
-%
-%\def\psfor... add your own!
-%
-% \ReadPSize{PSfilename} reads the dimensions of a PostScript drawing
-% and stores it in \drawinght(wd)
-\newread\pst@mpin
-\newdimen\drawinght\newdimen\drawingwd
-\newdimen\psxoffset\newdimen\psyoffset
-\newbox\drawingBox
-\newif\ifNotB@undingBox
-\newhelp\PShelp{Proceed: you'll have a 5cm square blank box instead of
-your graphics (Jean Orloff).}
-\def\@mpty{}
-\def\s@tsize#1 #2 #3 #4\@ndsize{
- \def\psllx{#1}\def\pslly{#2}%
- \def\psurx{#3}\def\psury{#4}% needed by a crazyness of dvips!
- \ifx\psurx\@mpty\NotB@undingBoxtrue% this is not a valid one!
- \else
- \drawinght=#4bp\advance\drawinght by-#2bp
- \drawingwd=#3bp\advance\drawingwd by-#1bp
-% !Units related by crazy factors as bp/pt=72.27/72 should be BANNED!
- \fi
- }
-\def\sc@nline#1:#2\@ndline{\edef\p@rameter{#1}\edef\v@lue{#2}}
-\def\g@bblefirstblank#1#2:{\ifx#1 \else#1\fi#2}
-\def\psm@keother#1{\catcode`#112\relax}% borrowed from latex
-\def\execute#1{#1}% Seems stupid, but cs are identified BEFORE execution
-{\catcode`\%=12
-\xdef\B@undingBox{%%BoundingBox}
-} %% is not a true comment in PostScript, even if % is!
-\def\ReadPSize#1{
- \edef\PSfilename{#1}
- \openin\pst@mpin=#1\relax
- \ifeof\pst@mpin \errhelp=\PShelp
- \errmessage{I haven't found your postscript file (\PSfilename)}
- \psloc@lerr{was not found}
- \s@tsize 0 0 142 142\@ndsize
- \closein\pst@mpin
- \else
- \immediate\write\psbj@inaux{#1,}
- \loop
- \executeinspecs{\catcode`\ =10\global\read\pst@mpin to\n@xtline}
- \ifeof\pst@mpin
- \errhelp=\PShelp
- \errmessage{(\PSfilename) is not an Encapsulated PostScript File:
- I could not find any \B@undingBox: line.}
- \edef\v@lue{0 0 142 142:}
- \psloc@lerr{is not an EPSFile}
- \NotB@undingBoxfalse
- \else
- \expandafter\sc@nline\n@xtline:\@ndline
- \ifx\p@rameter\B@undingBox\NotB@undingBoxfalse
- \edef\t@mp{%
- \expandafter\g@bblefirstblank\v@lue\space\space\space}
- \expandafter\s@tsize\t@mp\@ndsize
- \else\NotB@undingBoxtrue
- \fi
- \fi
- \ifNotB@undingBox\repeat
- \closein\pst@mpin
- \fi
-\message{#1}
-}
-%
-% \psboxto(xdim;ydim){psfilename}: you specify the dimensions and
-% TeX uniformly scales to fit the largest one. If xdim=0pt, the
-% scale is fully determined by ydim and vice versa.
-% Notice: psboxes are a real vboxes; couldn't take hbox otherwise all
-% indentation and all cr's would be interpreted as spaces (hugh!).
-%
-\newcount\xscale \newcount\yscale \newdimen\pscm\pscm=1cm
-\newdimen\d@mx \newdimen\d@my
-\let\ps@nnotation=\relax
-\def\psboxto(#1;#2)#3{\vbox{
- \ReadPSize{#3}
- \divide\drawingwd by 1000
- \divide\drawinght by 1000
- \d@mx=#1
- \ifdim\d@mx=0pt\xscale=1000
- \else \xscale=\d@mx \divide \xscale by \drawingwd\fi
- \d@my=#2
- \ifdim\d@my=0pt\yscale=1000
- \else \yscale=\d@my \divide \yscale by \drawinght\fi
- \ifnum\yscale=1000
- \else\ifnum\xscale=1000\xscale=\yscale
- \else\ifnum\yscale<\xscale\xscale=\yscale\fi
- \fi
- \fi
- \divide \psxoffset by 1000\multiply\psxoffset by \xscale
- \divide \psyoffset by 1000\multiply\psyoffset by \xscale
- \global\divide\pscm by 1000
- \global\multiply\pscm by\xscale
- \multiply\drawingwd by\xscale \multiply\drawinght by\xscale
- \ifdim\d@mx=0pt\d@mx=\drawingwd\fi
- \ifdim\d@my=0pt\d@my=\drawinght\fi
- \message{scaled \the\xscale}
- \hbox to\d@mx{\hss\vbox to\d@my{\vss
- \global\setbox\drawingBox=\hbox to 0pt{\kern\psxoffset\vbox to 0pt{
- \kern-\psyoffset
- \PSspeci@l{\PSfilename}{\the\xscale}
- \vss}\hss\ps@nnotation}
- \global\ht\drawingBox=\the\drawinght
- \global\wd\drawingBox=\the\drawingwd
- \baselineskip=0pt
- \copy\drawingBox
- \vss}\hss}
- \global\psxoffset=0pt
- \global\psyoffset=0pt% These are local to one figure
- \global\pscm=1cm
- \global\drawingwd=\drawingwd
- \global\drawinght=\drawinght
-}}
-%
-% \psboxscaled{scalefactor*1000}{PSfilename} allows to bypass the
-% rounding errors of TeX integer divisions for situations where the
-% TeX box should fit the original BoundingBox with a precision better
-% than 1/1000.
-%
-\def\psboxscaled#1#2{\vbox{
- \ReadPSize{#2}
- \xscale=#1
- \message{scaled \the\xscale}
- \divide\drawingwd by 1000\multiply\drawingwd by\xscale
- \divide\drawinght by 1000\multiply\drawinght by\xscale
- \divide \psxoffset by 1000\multiply\psxoffset by \xscale
- \divide \psyoffset by 1000\multiply\psyoffset by \xscale
- \global\divide\pscm by 1000
- \global\multiply\pscm by\xscale
- \global\setbox\drawingBox=\hbox to 0pt{\kern\psxoffset\vbox to 0pt{
- \kern-\psyoffset
- \PSspeci@l{\PSfilename}{\the\xscale}
- \vss}\hss\ps@nnotation}
- \global\ht\drawingBox=\the\drawinght
- \global\wd\drawingBox=\the\drawingwd
- \baselineskip=0pt
- \copy\drawingBox
- \global\psxoffset=0pt
- \global\psyoffset=0pt% These are local to one figure
- \global\pscm=1cm
- \global\drawingwd=\drawingwd
- \global\drawinght=\drawinght
-}}
-%
-% \psbox{PSfilename} makes a TeX box having the minimal size to
-% enclose the picture
-\def\psbox#1{\psboxscaled{1000}{#1}}
-%
-%
-% \joinfiles file1, file2, ...n \into joinedfilename .
-% makes one file out of many
-% \splitfile joinedfilename
-% the opposite
-%
-%\def\execute#1{#1}% NOT stupid: cs in #1 are then identified BEFORE execution
-%\def\psm@keother#1{\catcode`#112\relax}% borrowed from latex
-%\def\executeinspecs#1{%
-%\execute{\begingroup\let\do\psm@keother\dospecials\catcode`\^^M=9#1\endgroup}}
-%\newread\pst@mpin
-\newif\ifn@teof\n@teoftrue
-\newif\ifc@ntrolline
-\newif\ifmatch
-\newread\j@insplitin
-\newwrite\j@insplitout
-\newwrite\psbj@inaux
-\immediate\openout\psbj@inaux=psbjoin.aux
-\immediate\write\psbj@inaux{\string\joinfiles}
-\immediate\write\psbj@inaux{\jobname,}
-%
-% We redefine input to keep track of the various files inputted
-%
-\immediate\let\oldinput=\input
-\def\input#1 {
- \immediate\write\psbj@inaux{#1,}
- \oldinput #1 }
-\def\empty{}
-\def\setmatchif#1\contains#2{
- \def\match##1#2##2\endmatch{
- \def\tmp{##2}
- \ifx\empty\tmp
- \matchfalse
- \else
- \matchtrue
- \fi}
- \match#1#2\endmatch}
-\def\warnopenout#1#2{
- \setmatchif{TrashMe,psbjoin.aux,psbjoin.all}\contains{#2}
- \ifmatch
- \else
- \immediate\openin\pst@mpin=#2
- \ifeof\pst@mpin
- \else
- \errhelp{If the content of this file is so precious to you, abort (ie
-press x or e) and rename it before retrying.}
- \errmessage{I'm just about to replace your file named #2}
- \fi
- \immediate\closein\pst@mpin
- \fi
- \message{#2}
- \immediate\openout#1=#2}
-% No comments allowed below: % will have an unusual catcode
-{
-\catcode`\%=12
-\gdef\splitfile#1 {
- \immediate\openin\j@insplitin=#1
- \message{Splitting file #1 into:}
- \warnopenout\j@insplitout{TrashMe}
- \loop
- \ifeof
- \j@insplitin\immediate\closein\j@insplitin\n@teoffalse
- \else
- \n@teoftrue
- \executeinspecs{\global\read\j@insplitin to\spl@tinline\expandafter
- \ch@ckbeginnewfile\spl@tinline%Beginning-Of-File-Named:%\endcheck}
- \ifc@ntrolline
- \else
- \toks0=\expandafter{\spl@tinline}
- \immediate\write\j@insplitout{\the\toks0}
- \fi
- \fi
- \ifn@teof\repeat
- \immediate\closeout\j@insplitout}
-\gdef\ch@ckbeginnewfile#1%Beginning-Of-File-Named:#2%#3\endcheck{
- \def\t@mp{#1}
- \ifx\empty\t@mp
- \def\t@mp{#3}
- \ifx\empty\t@mp
- \global\c@ntrollinefalse
- \else
- \immediate\closeout\j@insplitout
- \warnopenout\j@insplitout{#2}
- \global\c@ntrollinetrue
- \fi
- \else
- \global\c@ntrollinefalse
- \fi}
-\gdef\joinfiles#1\into#2 {
- \message{Joining following files into}
- \warnopenout\j@insplitout{#2}
- \message{:}
- {
- \edef\w@##1{\immediate\write\j@insplitout{##1}}
- \w@{% This text was produced with psbox's \string\joinfiles.}
- \w@{% To decompose and tex it:}
- \w@{%-save this with a filename CONTAINING ONLY LETTERS, and no extensions}
- \w@{% (say, JOINTFIL), in some uncrowded directory;}
- \w@{%-make sure you can \string\input\space psbox.tex (version>=1.3);}
- \w@{%-tex JOINTFIL using Plain, or LaTeX, or whatever is needed by}
- \w@{% the first part in the joining (after splitting JOINTFIL into}
- \w@{% it's constituents, TeX will try to process it as it stands).}
- \w@{\string\input\space psbox.tex}
- \w@{\string\splitfile{\string\jobname}}
- }
- \tre@tfilelist#1, \endtre@t
- \immediate\closeout\j@insplitout}
-\gdef\tre@tfilelist#1, #2\endtre@t{
- \def\t@mp{#1}
- \ifx\empty\t@mp
- \else
- \llj@in{#1}
- \tre@tfilelist#2, \endtre@t
- \fi}
-\gdef\llj@in#1{
- \immediate\openin\j@insplitin=#1
- \ifeof\j@insplitin
- \errmessage{I couldn't find file #1.}
- \else
- \message{#1}
- \toks0={%Beginning-Of-File-Named:#1}
- \immediate\write\j@insplitout{\the\toks0}
- \executeinspecs{\global\read\j@insplitin to\oldj@ininline}
- \loop
- \ifeof\j@insplitin\immediate\closein\j@insplitin\n@teoffalse
- \else\n@teoftrue
- \executeinspecs{\global\read\j@insplitin to\j@ininline}
- \toks0=\expandafter{\oldj@ininline}
- \let\oldj@ininline=\j@ininline
- \immediate\write\j@insplitout{\the\toks0}
- \fi
- \ifn@teof
- \repeat
- \immediate\closein\j@insplitin
- \fi}
-}
-% To be put at the end of a file, for making an tar-like file containing
-% everything it used.
-\def\autojoin{
- \immediate\write\psbj@inaux{\string\into\space psbjoin.all}
- \immediate\closeout\psbj@inaux
- \input psbjoin.aux
-}
-%
-% Annotations & Captions etc...
-%
-%
-% \centinsert{anybox} is just a centered \midinsert, but is included as
-% people barely use the original inserts from TeX.
-%
-\def\centinsert#1{\midinsert\line{\hss#1\hss}\endinsert}
-\def\psannotate#1#2{\def\ps@nnotation{#2\global\let\ps@nnotation=\relax}#1}
-\def\pscaption#1#2{\vbox{
- \setbox\drawingBox=#1
- \copy\drawingBox
- \vskip\baselineskip
- \vbox{\hsize=\wd\drawingBox\setbox0=\hbox{#2}
- \ifdim\wd0>\hsize
- \noindent\unhbox0\tolerance=5000
- \else\centerline{\box0}
- \fi
-}}}
-% for compatibility with older versions
-\def\psfig#1#2#3{\pscaption{\psannotate{#1}{#2}}{#3}}
-\def\psfigurebox#1#2#3{\pscaption{\psannotate{\psbox{#1}}{#2}}{#3}}
-%
-% \at(#1;#2)#3 puts #3 at #1-higher and #2-right of the current
-% position without moving it (to be used in annotations).
-\def\at(#1;#2)#3{\setbox0=\hbox{#3}\ht0=0pt\dp0=0pt
- \rlap{\kern#1\vbox to0pt{\kern-#2\box0\vss}}}
-%
-% \gridfill(ht;wd) makes a 1cm*1cm grid of ht by wd whose lower-left
-% corner is the current point
-\newdimen\gridht \newdimen\gridwd
-\def\gridfill(#1;#2){
- \setbox0=\hbox to 1\pscm
- {\vrule height1\pscm width.4pt\leaders\hrule\hfill}
- \gridht=#1
- \divide\gridht by \ht0
- \multiply\gridht by \ht0
- \gridwd=#2
- \divide\gridwd by \wd0
- \multiply\gridwd by \wd0
- \advance \gridwd by \wd0
- \vbox to \gridht{\leaders\hbox to\gridwd{\leaders\box0\hfill}\vfill}}
-%
-% Useful to measure where to put annotations
-\def\fillinggrid{\at(0cm;0cm){\vbox{
- \gridfill(\drawinght;\drawingwd)}}}
-%
-% \textleftof\anybox: Sample text\endtext
-% inserts "Sample text" on the left of \anybox ie \vbox, \psbox.
-% \textrightof is the symmetric (not documented, too uggly)
-% Welcome any suggestion about clean wraparound macros from
-% TeXhackers reading this
-%
-\def\textleftof#1:{
- \setbox1=#1
- \setbox0=\vbox\bgroup
- \advance\hsize by -\wd1 \advance\hsize by -2em}
-\def\textrightof#1:{
- \setbox0=#1
- \setbox1=\vbox\bgroup
- \advance\hsize by -\wd0 \advance\hsize by -2em}
-\def\endtext{
- \egroup
- \hbox to \hsize{\valign{\vfil##\vfil\cr%
-\box0\cr%
-\noalign{\hss}\box1\cr}}}
-%
-% \frameit{\thick}{\skip}{\anybox}
-% draws with thickness \thick a box around \anybox, leaving \skip of
-% blank around it. eg \frameit{0.5pt}{1pt}{\hbox{hello}}
-% \boxit{\anybox} is a shortcut.
-\def\frameit#1#2#3{\hbox{\vrule width#1\vbox{
- \hrule height#1\vskip#2\hbox{\hskip#2\vbox{#3}\hskip#2}%
- \vskip#2\hrule height#1}\vrule width#1}}
-\def\boxit#1{\frameit{0.4pt}{0pt}{#1}}
-%
-%
-\catcode`\@=12 % cs containing @ are unreachable
-%
-% CUSTOMIZE YOUR DEFAULT DRIVER:
-% Uncomment the line corresponding to your TeX system:
-%\psfortextures% For TeXtures on the Macintosh
-%\psforoztex % For OzTeX shareware on the Macintosh
-%\psfordvitops % For the DVItoPS converter for TeX on IBM mainframes
- \psfordvips % For DVIPS converter on VAX and UNIX
-%\psfordvitps % For dvitps from TeXPS package under UNIX
-%\psforDVIALW % For DVIALW, UNIX public domain
-%\psonlyboxes % Blank Boxes (when all else fails).
projects / ctsim.git / blobdiff