r7920: changes to compile on new automake and xfree_4.3.0_0pre1v1

[ctsim.git] / configure

diff --git a/configure b/configure
index 881c7bff29be195ecfe5bfbdae4f25a5b26a6b06..fc903ac365fc309e98482658ae1dc2b4287aa8c4 100755 (executable)
--- a/configure
+++ b/configure
@@ -954,7 +954,7 @@ ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
     else
       echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
     fi
-    cd $ac_popdir
+    cd "$ac_popdir"
   done
 fi
 
@@ -1151,7 +1151,7 @@ _ASBOX
       echo "$as_me: caught signal $ac_signal"
     echo "$as_me: exit $exit_status"
   } >&5
-  rm -f core core.* *.core &&
+  rm -f core *.core &&
   rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
     exit $exit_status
      ' 0
@@ -1600,7 +1600,7 @@ fi
 
 # Define the identity of the package.
  PACKAGE=ctsim
- VERSION=4.2.3
+ VERSION=4.2.6
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2724,8 +2724,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
   for ac_declaration in \
-   ''\
-   '#include <stdlib.h>' \
+   '' \
    'extern "C" void std::exit (int) throw (); using std::exit;' \
    'extern "C" void std::exit (int); using std::exit;' \
    'extern "C" void exit (int) throw ();' \
@@ -2739,8 +2738,8 @@ _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-#include <stdlib.h>
 $ac_declaration
+#include <stdlib.h>
 int
 main ()
 {
@@ -2830,8 +2829,9 @@ DEPDIR="${am__leading_dot}deps"
 
 am_make=${MAKE-make}
 cat > confinc << 'END'
-doit:
+am__doit:
        @echo done
+.PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
 echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
@@ -2906,18 +2906,32 @@ else
   # using a relative directory.
   cp "$am_depcomp" conftest.dir
   cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
 
   am_cv_CC_dependencies_compiler_type=none
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
   for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
     # We need to recreate these files for each test, as the compiler may
     # overwrite some of them when testing with obscure command lines.
     # This happens at least with the AIX C compiler.
-    echo '#include "conftest.h"' > conftest.c
-    echo 'int i;' > conftest.h
-    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      : > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
     case $depmode in
     nosideeffect)
@@ -2935,11 +2949,12 @@ else
     # mode.  It turns out that the SunPro C++ compiler does not properly
     # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=conftest.c object=conftest.o \
-       depfile=conftest.Po tmpdepfile=conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o conftest.o conftest.c \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
          >/dev/null 2>conftest.err &&
-       grep conftest.h conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # (even with -Werror).  So we grep stderr for any message
@@ -3201,8 +3216,7 @@ else
   fi
 fi
 for ac_declaration in \
-   ''\
-   '#include <stdlib.h>' \
+   '' \
    'extern "C" void std::exit (int) throw (); using std::exit;' \
    'extern "C" void std::exit (int); using std::exit;' \
    'extern "C" void exit (int) throw ();' \
@@ -3216,8 +3230,8 @@ _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-#include <stdlib.h>
 $ac_declaration
+#include <stdlib.h>
 int
 main ()
 {
@@ -3313,18 +3327,32 @@ else
   # using a relative directory.
   cp "$am_depcomp" conftest.dir
   cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
 
   am_cv_CXX_dependencies_compiler_type=none
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
   for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
     # We need to recreate these files for each test, as the compiler may
     # overwrite some of them when testing with obscure command lines.
     # This happens at least with the AIX C compiler.
-    echo '#include "conftest.h"' > conftest.c
-    echo 'int i;' > conftest.h
-    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      : > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
     case $depmode in
     nosideeffect)
@@ -3342,11 +3370,12 @@ else
     # mode.  It turns out that the SunPro C++ compiler does not properly
     # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=conftest.c object=conftest.o \
-       depfile=conftest.Po tmpdepfile=conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o conftest.o conftest.c \
+       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
          >/dev/null 2>conftest.err &&
-       grep conftest.h conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # (even with -Werror).  So we grep stderr for any message
@@ -3563,7 +3592,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 ( exit $ac_status )
 ac_cv_c_bigendian=yes
 fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 rm -f conftest.$ac_objext conftest.$ac_ext
@@ -4136,7 +4165,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 fi
@@ -4559,7 +4588,7 @@ echo "$as_me: error: cannot compute sizeof (short), 77
 See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 rm -f conftest.val
@@ -4920,7 +4949,7 @@ echo "$as_me: error: cannot compute sizeof (int), 77
 See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 rm -f conftest.val
@@ -5281,7 +5310,7 @@ echo "$as_me: error: cannot compute sizeof (long), 77
 See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 rm -f conftest.val
@@ -5642,7 +5671,7 @@ echo "$as_me: error: cannot compute sizeof (float), 77
 See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 rm -f conftest.val
@@ -6003,7 +6032,7 @@ echo "$as_me: error: cannot compute sizeof (double), 77
 See \`config.log' for more details." >&2;}
    { (exit 1); exit 1; }; }
 fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 rm -f conftest.val
@@ -6805,7 +6834,7 @@ sed 's/^/| /' conftest.$ac_ext >&5
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
 fi
 fi
@@ -8043,9 +8072,11 @@ _ACEOF
 
   ctlibs_base="$ctlibs_base -lgetopt"
   LDFLAGS="$LDFLAGS -L../getopt"
+  GETOPTLONG=1
+fi
 
 
-if test 1==1; then
+if test $GETOPTLONG==1; then
   INCLUDED_GETOPT_LONG_TRUE=
   INCLUDED_GETOPT_LONG_FALSE='#'
 else
@@ -8053,7 +8084,6 @@ else
   INCLUDED_GETOPT_LONG_FALSE=
 fi
 
-fi
 
 if test "${readline}" = "true" ; then
   ctlibs_base="$ctlibs_base -lreadline"